The Soundcraft MH3 is a professional, large format sound reinforcement console that's designed for front-of-house (FOH) and monitor mixing applications. The MH3 is available in 24, 32, 40, 48 and 56 channel frames to accommodate various input needs.
This model is configured with 48 input channels. 56 inputs feature microphone and line level connections, an additional 4 stereo inputs are provided as well. The stereo inputs enable flexible auxiliary routing for monitoring mixing applications. The console features 8 group outputs enabling routing to monitors, external recorders, etc. The MH3 series implements Soundcraft's microphone preamps and EQ section, delivering the sonic quality expected of more costly consoles.
Additional features include a 12 x 4 matrix mixer (expandable to 12 x 8) for added routing flexibility and an integrated meter bridge, enabling accurate metering.
Soundcraft RW5658 Features:
- 56 Mono, 4 Stereo Input Channels
The MH3 is available in a variety of frame configurations. This model features 56 mono and 4 stereo inputs.
- 8 Subgroup Outputs
The MH3 series features 8 group outputs for routing to external recorders, monitors, etc.
- Matrix Mixer
The matrix output mixer provides added routing flexibility.
- 8 Auxiliary Sends
8 auxiliary sends provide plenty of routing to external effects, monitors, etc.
- Direct Outputs
All mono inputs provide direct outputs for direct routing to recorders, mixers, etc.
- High Performance Microphone Preamplifiers
The MH3 microphone preamplifiers provide an ultra low-noise floor while maintaining high output gain.
Soundcraft RW5658 Specifications:
|Total # Of Inputs ||56 Total |
|Mic/Line Inputs ||56 Line: 1/4" TRS Phone |
56 Microphone: 3-pin XLR
|Stereo Line Inputs ||4 Stereo: L/R 3-pin XLR Microphone / Line |
|In-Line Inputs/Returns ||No |
|AUX Sends ||8 Aux Sends |
|AUX Returns ||4 Stereo Returns |
|Inserts ||1/4" TRS Phone - Mono Inputs, Main Output and Subgroup Outputs |
|BUS (Group) Outputs ||8 Subgroups: Balanced 3-pin XLR |
|2 Trk Master I/O ||Mix L/R: Stereo Paired 3-pin XLR Balanced |
|ALT I/O ||ALT Stereo: L/R Stereo Paired 1/4" Output |
|Monitor Outputs ||Monitor: L/R Stereo Paired 1/4" TRS Phone |
|EQ Section ||High Filter: 1kHz - 20kHz +/- 15dB, shelving |
Hi-Mid: 750Hz - 13kHz, +/- 15dB, Q=0.5 - 3.0
Lo-Mid: 75Hz - 1.3kHz, +/- 15dB, Q=0.5 - 3.0
Low Filter: 30Hz - 500Hz +/- 15dB, shelving
|Solo/Mute ||All Input Channels |
|Channel Level Control ||100mm Faders |
|Trim/Gain Control ||Rotary Potentiometers |
|Phantom Power ||+48V Phantom individually switched |
|Metering ||Internal 12-segment LED bar graphs all I/O (24-segment L/R/C Out) |
Optional VU meters monitoring O/P Faders 1-8 / Aux 9-12 / Matrix 1-4 via bank selection, and L/R/C
|Frequency Response ||20Hz to 20kHz |
|Dynamic Range ||not specified by manufacturer |
|Signal-to-Noise Ratio ||Measured RMS, 22Hz to 22kHz Bandwidth, unweighted |
Residual Noise: -95dBu
|Total Harmonic Distortion (THD) ||All measurements @ +10dBu |
XLR In to Direct Out <0.015% @ 1kHz
XLR In to Mix Out <0.0015% @ 1kHz
|Power Supply ||Mains Power 56ch: 600VA max, 24ch 300VA max |
48Ch console: each 17V rail takes 8.5mA (nominal, measured with 4 Littlites connected)
|Dimensions ||11 x 32 x 97.4" (279 x 812.8 x 2473.96mm) (HxDxW) |
|Weight ||253 lbs. (114.75 kg) |