Offering a XGA resolution and 10-bit digital gamma correction, the Sanyo PLC-XT21L
makes it possible to project high-quality high definition images from virtually any location. At 4000 lumens this extremely bright projector is perfect for delivering a PC-based presentation with high quality graphics and images or displaying high-resolution video.
Sanyo PLCXT21L Description:
The projector is easy to install using Sanyos exclusive Lens Center design that offers unlimited setup options to meet specific staging requirements with 360-degree position function. In addition, the power lens shift ensures flawless image projection even in challenging and unusual positions. Optional POA-PN03C networking module allows the monitoring of projector functions and operation from a remote location via a web browser.
Sanyo PLCXT21L Features:
High Quality Projection
Equipped with a 300W lamp and number of advanced technologies in its optical engine, the projector provides brightness of 4000 lumens, approaching the brightness of many large, multi-lamp models. Ideal for a wide range of applications in event halls, classrooms, and meeting rooms.
An optical compensator that has excellent light and heat resistance is used to achieve a long service life for the optical block and dramatically increased reliability. By suppressing disturbances in polarized waves and minimizing the light leakage from the LCD panel, the optical compensator ensures high-contrast on-screen color reproduction with solid black. A remarkable contrast ratio of 1000:1 ensures the PLC-XT21L offers more natural image reproduction with finer gradations.
Cabinet design offers improved air flow with One-Way Flow System, an efficient temperature control system that cools the projector. By eliminating many intake and exhaust ports from various places on the projector (such as the bottom surface) and concentrating air flow into one intake and one exhaust (both on the side), the projector cools much more efficiently and makes it much harder for dust to enter.
The symmetric Lens Center Design (left-right center layout = left-right centered optical axis) offers unlimited setup options to meet specific staging requirements. To further increase installation convenience, the significantly improved Up/Down/Left/Right lens shift ensures flawless image projection even at the most challenging positions.
Tilted installation (360 tilt angle) offers greater flexibility between the projector and screen positions, and overall installation conditions.
Built-in test pattern generator (8 patterns) makes on-site setup easier by serving as a guide for setting adjustments.
RGB computer inputs include DVI-D or D-Sub 15-pin and BNC x5. Video inputs include component (BNC x3), composite (BNC) and S-Video. There is a stereo minijack for each of the two computer inputs and a stereo input (RCA x2) for the video inputs.
Outputs include a monitor output (D-sub 15-pin) and stereo minijack. Variable audio output allows users to control the audio level right from the projector.
Also offers USB connector (includes cable) to control your computer with the projector remote control, RS-232 port and wired remote control jack.
When it is time to clean the filter, or when the filter is clogged, warnings are sent via LED indicators and a message on the on-screen display. Cleaning clogged filters increases picture quality while reducing heat damage to the interior.
For further maintenance the top plate can be flipped open to clean and replace the Prism Block system. Dust can be cleaned from the LCD panel to reduce artifacts in the projected images, and simple maintenance can be performed on optical parts without having to remove the cabinet.
Lamp and filter replacement is extremely easy.
Operating noise is hardly noticeable even in quiet settings like conference or AV rooms. The whisper quiet fan system produces an amazingly low noise level of only 31dB (economy mode).
With its small size and light weight (only 19 lbs. with lens), the PLC-XT21L is easy to take anywhere.
Backed by a three-year parts and labor warranty including Quick Repair Program (QRP). If it has been determined by Sanyos technical offices that the projector needs service, you will be faxed or e-mailed a QRP authorization number and instructions where and how to send the unit. Sanyo provides a Federal Express number so that you can overnight the malfunctioning unit to them (Sanyo pays the freigh). After they receive the unit, Sanyo will repair it and return it to you in 24-72 hours. The warranty on the projection lamp is 90 days.
Networking and Control with Optional PJ-Net Organizer Plus
The PLC-XT21L can be connected to a computer network via the optional PJ-Net Organizer Plus networking module (POA-PN03C) for advanced management and control capabilities. The module holds an IP address and is the projectors portal to the network. Simply mount the module into the projector, and operators can monitor projector functions and operation from a remote location via a web browser. Monitor functions such as power status, lamp status, input mode, signal condition, lamp-use time etc. In addition, the POA-PN03C also comes with a 1/3" CMOS color camera, so users can monitor the actual picture, check status and control projector functions via any web browser.
- Via web browser you can check on lamp use time, projector use time, in-store condition, power supply, input information; controls power (on/off), input mode, PC, system, image, and other settings; save or download settings of input mode, system, image and screen settings.
- A warning notification can be automatically sent to the registered users email whenever the projector encounters a problem such as power or lamp failure.
- PC image transmission function lets you send the same image data to 100 different projectors at same time.
- Automatic Timer function lets you turn on or off a series of projectors at a specified day, date and time. Users can program the days and times of projector use (maximum 10 events) so that the projector will automatically switch on and off. The timer can be programmed to run every day or every week, or for specific days.
- A single computer can control and setup up to 99 projectors without the need for any special control boxes or software.
- POA-PN03C is also equipped with an RS-232 port allowing control systems such as AMX and Crestron to be used simultaneously.
Sanyo PLCXT21L Specifications:
|Resolution ||XGA (1024 x 768)|
|Brightness (typical) ||4000 ANSI Lumens |
|Uniformity ||90% (corner to center)|
|LCD Panel System ||1.0 TFT Poly w/Micro Lens|
|Number of Pixels ||2,359,296 (786,432 x 3)|
|Contrast Ratio ||1000:1|
|Projection Image (diagonal) ||30 -300 |
|Aspect Ratio ||4:3|
|Throw Distance ||Dependent on Lens|
|Zoom/Focus ||Dependent on Lens|
|Up/Down Ratio ||Dependent on Lens|
|Right/Left Ratio ||Dependent on Lens|
|Digital Keystone Correction ||Vert. + 40 /-40 |
|Projection System ||Dichroic mirror & X prism system w/ PBS|
|Projection Lens ||Dependent on Lens|
|Lens Throw Ratio ||Dependent on Lens|
|Projection Lamp ||300W UHP|
|Scanning Frequency ||H 15-100kHz; V 50-100Hz (auto sense/select)|
|Dot Clock ||140MHz(Analog), 100MHz(Digital)|
|Color System ||PAL/PAL-M/PAL-N/SECAM/NTSC/NTSC4.43|
|Computer Compatibility ||UXGA(Only Analog RGB), WXGA, SXGA+, SXGA, XGA, SVGA, VGA, MAC|
|Sound Output ||1W|
|Voltage ||100-120/200-240V AC; 50/60/Hz (auto sense/select)|
|BTU Rating ||1467|
|dB Rating ||35 dBA / 31 dBA (normal/eco)|
|Power Consumption ||395W / 360W (normal/eco)|
|Dimensions (WxHxD) ||13.7 x 6.2 x 17.5 (w/o surface projection)|
|Net Weight ||19.2 lbs./17.9lbs.(w/lens, wo/lens)|
|User Maintenance ||Clean air filters, replace lamp assembly|
|Computer Input Terminal 1 ||RGB (D-Sub15 x1, DVI-D x1) |
Audio (stereo mini jack x 1)
|Computer Input Terminal 2 ||RGB/Component/Composite (BNC x 5)|
Audio (stereo mini jack x 1)
|Video Input Terminal ||Composite (RCA) |
S-Video (mini DIN4)
Stereo Audio(RCA x 2)
|Additional Input Terminals ||USB (Type B), Control (Mini Din 8-pin)|
|Output Terminals ||Monitor Out (D-Sub 15 x 1) |
Audio (stereo mini-jack)
|Included Accessories ||Wireless/Wired I/R remote control w/mouse pad and laser pointer|
Owner s manual (quick manual & CD-ROM)
AC power cord
Serial control cable(POA-MCSRL)
2 AAA batteries
PIN code label
|Optional Accessories ||610 330 7329 Replacement lamp|
945 087 1468 Replacement remote
POA-PN03C Optional PJ-Net camera
POA-PJNM01 PJ Master software