The PLC-XF1000 is equipped with a two-lamp system, which produces brightness of 12,000 ANSI lumens and thus an even brighter image than its predecessor. Sanyo uses high-performance inorganic LCD panels which create an impressively homogeneous image in conjunction with the contrast ratio and the image brightness. In addition, these panels absorb very little UV radiation, which greatly increases their service life and helps to assure a high level of investment security.
Sanyo PLCXF1000 Description:
The ten interchangeable lenses, which include wide-angle, standard and telephoto lenses, allow the PLC-XF1000 to be used on a wide range of projection surfaces. A mechanical
Sanyo PLCXF1000 Features:
QuaDrive optical engine 2 High-Output 330 watt lamps 12,000 Lumens Vertical/Horizontal Lens Shifting 360 Tilt Angle Power Zoom/Focus Ten optional lenses Mechanical Shutter Active Maintenance Filter (AMF) Easy Stacking Grooves MVP expansion-slot system
Sanyo PLCXF1000 Specifications:
| General |
| Device Type | LCD projector |
| Width | 20.9 in |
| Depth | 29.8 in |
| Height | 10.6 in |
| Weight | 60.8 lbs |
| Projector / Panel |
| Image Brightness | 12000 ANSI lumens |
| Image Contrast Ratio | 4000:1 |
| Uniformity | 90 % |
| Resolution | XGA (1024 x 768) |
| Native Aspect Ratio | 4:3 |
| Video Bandwidth | 230 MHz |
| Display Format | 786,432 pixels (1,024 x 768) x 3 |
| Color Support | Up to 1.07 billion colors |
| Max Sync Rate (V x H) | 120 Hz x 120 kHz |
| Lamp Type | 2 x NSHA 330 Watt |
| Projector Lens System |
| Lens | No lens |
| Video Input |
| Analog Video Format | NTSC, SECAM, PAL, PAL-N, PAL-M, NTSC 4.43 |
| Analog Video Signal | RGB, S-Video, component video |
| Digital Video Standard | Digital Visual Interface (DVI) |
| Input Device |
| Type | Remote control - external - wireless |
| Expansion / Connectivity |
| Interfaces | 1 x DVI-D - 24 pin digital DVI 1 x RGB input - 15 pin HD D-Sub (HD-15) 1 x S-video input - 4 pin mini-DIN 1 x remote control - mini-phone 3.5 mm 1 x component video input - BNC x 5 1 x serial RS-232C input - 9 pin D-Sub (DB-9) 1 x serial RS-232C output - 9 pin D-Sub (DB-9) |
| Miscellaneous |
| Cables Included | 1 x VGA cable |
| Power |
| Power Device | Power supply - internal |
| Voltage Required | AC 120/230 V |
| Power Consumption Operational | 940 Watt |
| Power Consumption Operational ( Standby ) | 17 Watt |
| Environmental Parameters |
| Min Operating Temperature | 41 F |
| Max Operating Temperature | 104 F |
