Sachtler 3025

3025 System Cine 30 Tripod

Quick Specs:
Model
Brand: Sachtler
SKU: 3025






Print Print Email Email Add to Wishlist Add to Wishlist

Sachtler 3025

Sachtler 3025 System Cine 30 Tripod
Shipping: FREE
Total Price: $9,699.00

Qty:
Rating: (Write a Review)
SKU: 3025
Condition: Brand New Factory Sealed With 1 Year USA Warranty
Shipping Methods:
Availability: Available [Details]
Related Series:


Additional Ways to Save Other Payment Options

View all payment options Google/Paypal Checkout


The Sachtler 3025 System Cine 30 consists of the 3006 Cine 30 HD 150mm fluid head, 6290 Cine 150 (long) tripod, 7023 Cine ground-level spreader, 3370 telescoping pan arm, and the 3060 side-load camera plate. Any long-suffering camera assistant will appreciate the Cine 30 HD 150mm fluid head and its unique side-load sliding camera plate. With the camera fully equipped, mounting and dismounting using the Snap & Go locking mechanism is safe, efficient, and worry-free. Fully compatible with Arri and OConnor camera plates, it features a fine adjustment for a tight, secure fit even if the plate is worn from use. Counterbalance is accomplished with an 18-step selector dial and a high/low range lever for rapid, yet fine-tuned, repeatable setups. Horizontal and vertical drag is governed by a similar 7-step (plus zero) indexed selector system in conjunction with Sachtlers patented leak-proof frictionless cartridges, which carry a separate 5-year warranty. A tilt safety lock guarantees the integrity of the payload until it is secured, and caliper disk brakes ensure reliable pan and tilt fixing during operation with a quick flip of a short-throw lever. When shooting a project with production cameras worth more than your house, you might carefully contemplate the integrity of your support system. With the Cine 150 (Long), you need not worry! Rated at an astonishing 309 lbs (140 kg), and utilizing reliable, time-proven aluminum alloy metallurgy with dual 35mm leg tubes, the payload is safely supported. Oversized rotary stage clamps ensure easy height adjustments in cold weather wearing gloves, and the die-cast 150mm receiver will accept most cine/EFP fluid heads. Used in conjunction with the included 7023 Cine ground-level spreader, payload integrity is assured, and delicate floor surfaces are protected.

Sachtler 3025 Description:

The Sachtler 3025 System Cine 30 consists of the 3006 Cine 30 HD 150mm fluid head, 6290 Cine 150 (long) tripod, 7023 Cine ground-level spreader, 3370 telescoping pan arm, and the 3060 side-load camera plate. Any long-suffering camera assistant will appreciate the Cine 30 HD 150mm fluid head and its unique side-load sliding camera plate. With the camera fully equipped, mounting and dismounting using the Snap & Go locking mechanism is safe, efficient, and worry-free. Fully compatible with Arri and OConnor camera plates, it features a fine adjustment for a tight, secure fit even if the plate is worn from use. Counterbalance is accomplished with an 18-step selector dial and a high/low range lever for rapid, yet fine-tuned, repeatable setups. Horizontal and vertical drag is governed by a similar 7-step (plus zero) indexed selector system in conjunction with Sachtlers patented leak-proof frictionless cartridges, which carry a separate 5-year warranty. A tilt safety lock guarantees the integrity of the payload until it is secured, and caliper disk brakes ensure reliable pan and tilt fixing during operation with a quick flip of a short-throw lever. When shooting a project with production cameras worth more than your house, you might carefully contemplate the integrity of your support system. With the Cine 150 (Long), you need not worry! Rated at an astonishing 309 lbs (140 kg), and utilizing reliable, time-proven aluminum alloy metallurgy with dual 35mm leg tubes, the payload is safely supported. Oversized rotary stage clamps ensure easy height adjustments in cold weather wearing gloves, and the die-cast 150mm receiver will accept most cine/EFP fluid heads. Used in conjunction with the included 7023 Cine ground-level spreader, payload integrity is assured, and delicate floor surfaces are protected.

Features:

Side-Loading Rapid Camera Mount
Snap&Go side-loading mechanism gets heavy camera packages mounted quickly without compromising safety or sliding range, and is also compatible with Arri and OConnor camera plates
18-Step Counterbalance and 7-Step Drag
For rapid setup and repeatable results
Payload Range Selector
Switch between the High and Low counterbalance ranges with a flip of the front-mounted Payload Range Selector lever
Caliper Disk Pan and Tilt Locks
Similar to braking systems on trucks or trains, the default position is on - in case of a system failure, the head will be locked
Illuminated Bubble Level
The Touch Bubble is a self-illuminated spirit level activated through contact, and is powered by three PX625A cells
Assistants Box Mount (optional)
Using the optional Front Box Adapter, an assistants box may attached to the front of the head without impairing the tilt range
Eyepiece Extension Support Adapter (optional)
Provides an anchorage point for eyepiece extension rods on the left side of the head
Heavy-Duty Leg Tubes
Oversized (35.0mm) aluminum alloy double leg tubes for absolute support integrity
Rotary Clamps
Extra-large rotary stage clamps for ease of use while wearing gloves
Ground-Level Spreader
Prevents tripod collapse while protecting delicate floor surfaces

Specifications:

General
Load Capacity
77.2 lbs (35.0 kg)
Maximum Height
77.7" (197.3 cm)
Maximum Height w/o Column Extended
N/A
Minimum Height
41.9" (106.4 cm)
Folded Length
49.0" (124.5 cm)
Leveling Bubble/Illuminated
Yes/Yes
Weight
36.0 lbs (16.3 kg)
Head
Counter Balance System
18-Step plus boost
Quick Release/Wedge Plate
Yes
Balance Plate
Yes, with 150mm of travel
Tilt Drag
7-Step plus zero
Tilt Range
-75 to +90
Tilt Lock
Caliper brake
Pan Drag
7-Step plus zero
Pan Range
360
Pan Lock
Caliper brake
Legs
Material
Aluminum alloy
Head Attachment Fitting
150mm
Leg Stages/Sections
1/2
Leg Lock Type
Rotary Clamps
Independent Leg Spread
Yes
Spiked/Retractable Feet
Spiked
Center Brace
Ground-level

Sachtler 3025 Reviews & Ratings



No Reviews Found

Shipping Methods & Details


  • Please enter your shipping ZIP Code to get available shipping methods and cost:


This item is brand new and comes with a full manufacturer warranty. Please refer to the table below for details

Warranty Center


Don't Gamble on a break-down!


Membership Benefits:
  • 100% Parts and Labor
  • No Deductibles
  • No Lemon Guarantee
  • Fully Transferable
  • Toll-Free Support
  • Worry Free For Up to 5 Years
  • Nationwide Coverage
  • Rapid Claim System
  • Electronic Registration

Coverage/Features Extended Service Plan Typical Manufacturer Warranty
Coverage Length
Up to 5 Years including parts and labor 1 Year Parts, 90 Days Labor
Wear and Tear(Normal Use)
Yes -
Product Replacement (If Product Cannot be Fixed)
Yes -
Power Surges
Yes -
Optional Accidental Damage
Yes -
Screen or Lens Replacement
Yes -
Worldwide
Yes -
Transferrable
Yes -
24/7 Toll Free Help
Yes -
No Lemon Policy
Yes -
Authorized Service Centers in Most Locations
Yes -



What exactly is an Extended Service Plan?
An extended service plan is generally an extension of your original manufacturer's warranty. Most manufacturers warranty their products to be free from defects for up to one year from the date of purchase. This warranty virtually guarantees you that if your newly purchased product fails, the manufacturer will protect you from the high costs of replacement parts and labor necessary to repair your product. Extended service plans lengthen your product's coverage for up to an additional 60 months (5 years) to insure you get years of performance satisfaction from your newly purchased product.

How is this different than the manufacturer's warranty?
A manufacturer's warranty usually offers limited coverage for a limited time, with parts and labor carrying separate lengths of coverage. For example, a common manufacturer warranty of a product might cover a consumer for one full year on parts defects but only 90 days on the high cost of labor involved to change those parts. Extended service plans provide comprehensive, long term, even length coverage. This means that should your product fail within your plans coverage time frame, both parts and labor costs are covered.

How do I buy an Extended Service Plan?
Extended Service Plans can be purchased along with your product online, or via our toll free number.

Can I renew my Consumer Priority Service extended service plan?
Yes, service plans are renewable and must be submitted 30 days prior to the original plans expiration. Please contact a sales representative to discuss your renewal options.

What should I do if I need extended service?
Our extended service providers offer an easy to use interactive form online which you may use to request that they initiate a claim on your product. Your other alternative is to call the toll-free number on your extended warranty card or email and have a qualified representative make this request for you with the information you will provide. We believe that our claim initiation request process is the absolute best our industry has to offer. It is designed for simplicity and speed.

Who will perform the service on my product?
Our company works with over 11,000 authorized service professionals. Each technician is extensively trained by the respective manufacturers to provide service on your products. Authorized technicians must complete annual and bi-annual continued education exams in addition to being well versed in manufacturer supplied update bulletins to ensure their level of expertise is as current as the new products which come to market. We urge our customers to provide feedback regarding their experiences which we later use to insure that the level of service we are expected to provide is exactly the level of service you receive.

May I transfer my extended service plan to another person?
Our service plans are 100% transferable. If you would like transfer ownership of the covered product along with its coverage, we require that the request be supplied in writing. For assistance please contact a Representative. Please have all of the new owner's information at hand when requesting a transfer.

Will I have to pay a deductible or any other "hidden costs"?
Generally, the amount of a deductible is almost always proportional to the amount of the premium charged. In order to have a lower deductible, even as low as $0, the plan holder would generally have to agree to a higher premium. For those who want lower premiums, they must agree to a higher deductible. Our extended service plans carry a $0.00 deductible along with low premiums. This means that with an extended service plan there are no high upfront costs and they are committed to cover 100% parts and labor costs on any authorized claim.