The APC J10 12 Outlet Power Conditioner with Battery Backup offers excellent value protection for home theater systems. Surge protected outlets keep all components safe from damaging surges, spikes and even lightning. Noise filter banks reduce electromagnetic and radio frequency interference that can harm picture and sound quality. Automatic Voltage Regulation (AVR) keeps voltage levels steady to ensure safe operation during low and high voltage conditions. Battery backup power keeps the home theater on, protects expensive TV bulbs and saves recordings stored on a DVR when the power goes out.
The J10 provides battery backup power to maintain uninterrupted power for the home theater in the event of a power blackout. Battery backup power not only prevents interruptions in your entertainment, it also prevents lost pre-sets, lost information stored on a Digital Video Recorder (DVR), damaged hard drives, and premature projector bulb wear and tear.
Sequenced turn-on and off ensures that connected equipment is powered-up/down in the proper order and with the right amount of delay between the stages. It allows you to program a delay into the sequence between 0 and 10 seconds. This feature helps to eliminate any "popping" sounds coming from speakers when turning on the system. This delay feature also eliminates transients that can affect connected components, e.g. digital projectors.
The J10 provides guaranteed protection against damaging surges, spikes and even lightning. The unit not only provides protection from surges traveling over AC power lines, but also protects against surges traveling over system data lines including COAX and telephone lines.
Automatic Voltage Regulation (AVR)
The J10 provides AVR which is engaged to correct low and high voltage conditions. In doing so, all equipment connected to the unit are protected against these undesired voltage fluctuations, thus, prolonging the life of the equipment. Low voltage conditions can also negatively impact video quality.
Isolated Noise Filter Banks (INFB)
The J10 provides INFB technology to eliminate electromagnetic and RF interference that can negatively impact sound and video quality. Each filter bank is electrically isolated from each other to prevent noise generated by one component from polluting other connected components.
Front Panel Controls and Indicators
Wiring OK Status Indicator
Line OK Status Indicator
Line Boost Status Indicator (AVR activated)
Line Trim Status Indicator (AVR activated)
Filtering Status Indicator
Switched On Status Indicator
Delayed On Status Indicator
Select Push Button
Backlit LCD Display
Setup Push Button
Low Battery Status Indicator
The outlets are arranged according to the type of filtering protection provided for a given application. They are split up into the following groups: Digital filter outlets, video filter outlets, analog filter outlets, and high current filter outlets.
DC Trigger Mini-Jack
When connected to a component acting as a DC trigger, that component controls turn on/off of the "delayed" outlet banks. The J10 also allows that DC signal to pass through to another connected component. The maximum input voltage for the DC Trigger is 30VDC.
LCD Display and Unit Customization
Conveys information about unit and power status. It is also used to display information when making settings changes to the unit.
Removable Support Feet
Feet can be unscrewed and removed to save space when rack mounting.
||J10 1kVA/600W Power Conditioner with Battery Backup - 120V Black|
||6.4 Minute 600W Full-load
18.8 Minute 300W Half-load
||Spill Proof, Maintenance Free Sealed Lead-acid|
||12 x NEMA 5-15R|
|Battery Recharge Time
||16 Hour Typical|
|Input Voltage Range
||120V AC Nominal
90V AC to 140V AC Mains Operation
||120V AC Nominal|
||5.25" Height x 17" Width x 18" Depth|
||15A Input Breaker Capacity|
|Certifications & Standards
||UL 1449, CSA, FCC Part 15 Class B, FCC Part 68, UL 1778, UL 498|
||12A Maximum Input Current|
||Full time multi-pole noise filtering : 0.7% IEEE surge let-through : zero clamping response time|