The motor is ball bearing and oiled for life producing a smooth, quiet deployment. In addition, there is an automatic thermal overload cut-out and integral interlocking gears. The fabric roller is mounted on two heavy duty brackets equipped with self-aligning bearings.
An additional feature to this screen is the sophisticated braking system which will stop the screen in either the up or down function while eliminating any "coasting".
Note! This item is ONLY wired for 220V, European voltage.
Pre-set but accessible limit switches to automatically stop screen surface in the "down" position
Matte White will be seamless in all standard sizes. High Power is available in sizes up to 9' x 12'. Horizontal seam required when both dimensions exceed 6'
||Executive Electrol |
||Ceiling recessed |
||Cinema Vision HC; flame retardant and mildew resistant vinyl |
||Not Applicable |
||Not Specified by Manufacturer |
||60 x 80' (1.5 x 2.0 m) |
||100" (2.54 m) |
||Front projection surfaces standard with black backing for opacity |
||220V, 50Hz |
This item is ONLY wired for 220V, European voltage.
||Decora style three position wall switch |
||Single motor Low Voltage Control (LVC) - external|
Wireless Remote Control for LVC
Radio Frequency Remote (Radio Frequency Range Extender available)
Key Locking Cover Plate for 120V or LVC Switch
Key Operated Switch for 120V only (NOTE: Cannot be used with LVC
Video Projector Interface Control - external
External SCB-100 - RS-232 Serial Control Board
NET-100 Ethernet-Serial Adapter
Motor compartment metal lined
||117.75" (3 m) |
||211 lbs (95.7kg) |