What if technology changes? What if a new projection format is introduced, or Draper introduces a superior new screen surface? With the Ultimate Access, that's not a problem; it's quick, easy and comparatively inexpensive to replace the screen in an Ultimate Access, with no extra electrical or ceiling work.
What if you're planning a facility and the room design is flexible, or the presentation rooms have not yet been determined? With the Ultimate Access, that's not a problem; install an Ultimate Access case in each room during construction, and think about screen selection later. Adds great value to the facility.
At the touch of a switch or wireless transmitter, the door of the Ultimate Access opens into the case before the viewing surface descends into the room. Your audience will be impressed by its precision timing and quiet, fluid movement.
You can install the case first and the screen later
Draper's Tab-Tensioning System keeps the screen flat, providing the best possible picture
12" extra drop is standard
An independently motorized ceiling closure.
In its closed position the motorized closure forms a solid bottom panel, giving the ceiling a clean appearance.
With control options, it can be operated from any remote location
||Ultimate Access/Series V |
||Ceiling recessed |
||M1300; flame and mildew resistant |
||Not Applicable |
||Not Specified by Manufacturer |
||60 x 80" (152.4 x 203.2cm) |
||100" (254cm) |
||12" extra drop is standard |
||110-120VAC, 60Hz. 5-wire motor mounted inside screen roller, 1.1 amp |
||3-position control switch|
Lifetime lubricated, with internal thermal overload protector and electric brake
Left side only
Preset, accessible limit switches
||Single Station Control (SS-1R)|
Multiple Station Controls (MS-3R / MS-4R)
Low Voltage Switch (LVC-S)
Key Operated 3-Position Switch (KS3 / SP-KSM)
Key Operated Power Supply Switch (KS-1)
Locking Switch Cover Plate (SP-KPS-I)
VIC Override Switch (VIC-OS)
Radio Frequency Remote Control (WRT/R)
Infrared Remote Control (IRT/R)
Low Voltage Control Module (LVC-III)
MC1 Motor Control Board
Video Interface Control
||Extruded aluminum |
||106-7/8" (271.7cm) |
||Net: 106 lbs (48.1kg) |