What if technology changes? What if a new projection format is introduced, or Draper introduces a superior new screen surface? With the Ultimate Access, that's not a problem; it's quick, easy and comparatively inexpensive to replace the screen in an Ultimate Access, with no extra electrical or ceiling work.
What if you're planning a facility and the room design is flexible, or the presentation rooms have not yet been determined? With the Ultimate Access, that's not a problem; install an Ultimate Access case in each room during construction, and think about screen selection later. Adds great value to the facility.
Features:Motor-in-roller assures quiet and smooth operation.
Ceiling-recessed screen with automatic closure.
An independently motorized ceiling closure - in its closed position, the motorized closure forms a solid bottom panel, giving the ceiling a clean appearance.
At the touch of a switch or wireless transmitter, the door of the Ultimate Access opens into the case before the viewing surface descends into the room.
Your audience will be impressed by its precision timing and quiet, fluid movement.
With control options, it can be operated from any remote location.
Depending on surface, available in sizes through 12 x 12' and 15' NTSC.
||Ultimate Access/Series E |
||Ceiling recessed |
||M2500; flame and mildew resistant |
||Not Applicable |
||Not Specified by Manufacturer |
||50x80" (1.3 x 2 m) |
||94" (2.4 m) |
||Borders are optional for Series E in A/V format |
||110-120VAC, 60Hz, 5-wire motor mounted inside screen roller, 1.1 amp |
||3-position control switch|
Switch(es) furnished with cover plate
Lifetime lubricated, with internal thermal overload protector and electric brake
Left hand motor location only
Preset, accessible limit switches
||Single Station Control (SS-1R)|
Multiple Station Controls (MS-3R / MS-4R)
Low Voltage Switch (LVC-S)
Key Operated 3-Position Switch (KS3 / SP-KSM)
Key Operated Power Supply Switch (KS-1)
Locking Switch Cover Plate (SP-KPS-I)
VIC Override Switch (VIC-OS)
Radio Frequency Remote Control (WRT/R)
Infrared Remote Control (IRT/R)
Low Voltage Control Module (LVC-III)
MC1 Motor Control Board
||Extruded aluminum |
||100-3/8" (255.3cm) |
||112 lbs (50.8kg) |