Description:

The motor is mounted inside the roller on special vibration insulators, so operating noise is dramatically reduced. It has a trim, balanced appearance. The pentagonal steel case has a scratch-resistant white polyester finish, with matching endcaps. Screen operates instantly at the touch of a button, and stops automatically in the "up" and "down" positions.

Features:

Ideal for lecture and conference rooms, classrooms, and churches
Motor-in-roller screen
Case has a scratch-resistant white polyester finish, with matching endcaps
Available with a ceiling trim kit for ceiling-recessed installation
Viewing surface can be lowered to any position at the touch of a switch
NTSC, HDTV and Wide-Screen format screens have black borders on all four sides
With control options, it can be operated from any remote location
Depending on surface, available in sizes through 12 x 12' and 15' NTSC

Specifications:

Type
Style Targa
Front/Rear Projection Front
Mount Wall or Ceiling
Finish AT Grey
Tension Control Non-tensioned
Keystone Control None

Dimensions
Overall Size Not Specified by Manufacturer
Image Size 50" x 92"
Diagonal 108"
Format WideScreen
Aspect Ratio 1.85:1
Masking Options Optional white aluminum ceiling opening trim kit available to trim opening when screen is to be recessed above the ceiling

Controls
Voltage
 110-120v AC,60Hz
 Motor mounted inside screen roller, 3-wire, instantly reversible, lifetime lubricated
Integrated Control
 Equipped with internal thermal overload protector and electric brake
 Motor mounted on rubber vibration insulators
 Pre-set accessible limit switch
 Three-position control switch stops or reverses screen at any point in the operating cycle
 Switch furnished complete with cover-plate

Control Options
 Single Station Control (SS-1R)
 Low Voltage Switch (LVC-S)
 Key Operated 3-Position Switch (KS3 / SP-KSM)
 Radio Frequency Remote Control (WRT/R)
 Infrared Remote Control (IRT/R)
 Video Interface Control

Casing
Color Flat back design and scratch-resistant white polyester finish
Material 22-gauge steel
Length 103"