The Draper 9 x 12' Access/Series V Motorized Projection Screen : Ceiling Recessed - Tab-Tensioned - Square/Audio-Visual Format (1:1 Aspect Ratio) (Hi Def Grey) - What if you know that you want a ceiling-recessed screen, but you don't know what projector (or projectors) will be used---and therefore you don't know the optimum size or aspect ratio of the screen, the optimum screen surface, or whether tab tensioning is required?
With the Access, that's not a problem; order the case now---just make sure it's large enough to accept the largest screen you think you may need. Order the screen later, after the projector decision is made. Or let the occupant make the decision at a later date.
What if technology changes? What if a new projection format is introduced or Draper introduces a superior new screen surface? With the Access, that's not a problem; it's quick, easy and comparatively inexpensive to replace the screen in an Access, with no extra electrical or ceiling work.
What if you're planning a facility and the room design is flexible, or the presentation rooms have not yet been determined? With the Access, that's not a problem; install an Access case in each room during construction, and think about screen selection later. Adds great value to the facility.
Draper's Tab Tensioning System keeps screen flat, providing the best possible picture
With control options, this projection screen can be operated from any remote location
12" extra drop is standard
Depending on surface, available in sizes through 12' x 12' and 15' NTSC
Style Access/Series V
Front/Rear Projection Front
Finish Hi Def Grey; flame and mildew resistant
Tension Control Tab-tensioned
Keystone Control Not Applicable
Overall Size 9" x 12"
Image Size 9" x 12"
Diagonal Not Applicable
Aspect Ratio 1:1
Masking Options Optional Black masking borders
Voltage 120VAC, 60 Hz, 3-wire motor mounted inside screen roller, 1.1 amp
3-position control switch
Switch(es) furnished with cover plate
Standard motor with preset accessible limit switches
Lifetime lubricated, with internal thermal over load protector and electric brake
Symmetrical housing to allow for left- or right-hand motor location
Single Station Control (SS-1R)
Multiple Station Controls (MS-3R/MS-4R)
Low Voltage Switch (LVC-S)
Key Operated 3-Position Switch (KS3/SP-KSM)
Key Operated Power Supply Switch (KS-1)
Locking Switch Cover Plate (SP-KPS-I)
VIC Override Switch (VIC-OS)
Radio Frequency Remote Control (WRT/R)
Infrared Remote Control (IRT/R)
Low Voltage Control Module (LVC-III)
MC1 Motor Control Board
Video Interface Control
Material Extruded aluminum