Phone #: 800-280-8987
Electro-Voice P3000 Precision Series 2-Channel Rackmount Power Amplifier - 1400 Watts per Side at 4 Ohms
Brand: Electro-Voice
Part Number: P3000

$2,399.99Free Shipping

Product Details:


The Electro-Voice P3000 is a 3RU rackmount power amplifer with 1400 watts per channel of power at 4 ohms, and steel housing for the chassis. This quiet, efficient workhorse amplifier offers a useful complement of limiting and filtering circuitry, amplifer and load protection, and a permanently attached power cable. The power supply is equipped with a large toroidal transformer, providing the amplifier with extended headroom and current output.


2-channel, 3RU rackmount power amplifier with 1400 Watts per side output at 4 Ohms
Solid steel chassis
Filtering and limiting circuitry
Full amplifier and load protection circuitry
Front panel LED's and calibrated level controls
Professional Neutrik Speakon speaker output connectors, XLR inputs and paralleled outputs
Quiet operation, dual 3-speed temperature sensitive fans


Power Rating
Rating @ 1 kHz, THD 1%
850W @ 8Ω Stereo (per channel)
1400W @ 4Ω Stereo (per channel)
1800W @ 2Ω Stereo (per channel)
2800W @ 8Ω Bridged-Mono
3600W @ 4Ω Bridged-Mono

Rating @ 20 Hz - 20 kHz, THD <0.1%
750W @ 8Ω Stereo (per channel)
1200W @ 4Ω Stereo (per channel)
1500W @ 2Ω Stereo (per channel)
2400W @ 8Ω Bridged-Mono
3000W @ 4Ω Bridged-Mono

Damping Factor
Input Sensitivity
775mV, 0dBu
Input Impedance
20 kOhms (balanced)
Frequency Response
10 Hz - 30 kHz (-1dB, ref. 1kHz/1W)
Signal-to-Noise Ratio
Total Harmonic Distortion (THD)
Input Connections
2 x XLR Female In
2 x XLR Male Parallel Out
Output Connectors
3 x Ch. A,B,Bridged Neutrik Speakon NL4
Controls Front Panel
1 x Power Switch
2 x Channel A,B Calibrated Input Level Controls
Controls (Rear)
1 x Limiter Switch
1 x Bridged Mode Switch
1 x Hi/Lo Cut Filter Switch
1 x Input Routing Switch
1 x Grounded/Ungrounded Switch
2 x Ch. A,B Power On LEDs
2 x Ch. A,B Input Signal LEDs
2 x Ch. A,B Output Signal LEDs
2 x Ch. A,B Limiter On LEDs
2 x Ch. A,B Protect On LEDs
2 x 3-speed fans
Power Consumption
1200 VA (Stereo @ 4 Ohms, 1/8 power)
Power Requirements
120V, 50-60 Hz
5.25 x 19 x 16.8" (132.5 x 483 x 426mm)
61.6 lbs (28 kg)
Rugged Zinc-Plated Steel Housing
Varispeed Fan Cooled
Comprehensive Amplifier and Load Protection Circuitry