The NEC NP-M300X Portable XGA Projector works equally well in the media room, classroom or meeting room. Its 3,000 lumens and 2,000:1 contrast ratio provide a rich, vivid picture in a variety of projection environments.
Its native resolution is XGA (1,024 x 768) but it can also scale images in the VGA, SVGA, WXGA, SXGA, SXGA+ and UXGA resolutions. It can also project video images in the NTSC, NTSC4.43, PAL, PAL-60, PAL-M, PAL-N and SECAM television standards. In addition it can handle both 720p and 1080i high definition programming. And its 100 - 240V AC, 50 / 60 Hz power supply makes is useable just about anywhere in the world.
The NP-M300X has lots of features you can appreciate while you're in the same room with it too. Setup is easy thanks to Keystone Correction which automatically squares up your image while Autosense detects and syncs the projector with most computers. The Virtual Remote Tool software that comes with the projector allows you to control it from your laptop when you connect them with the VGA cable that's included. No other cabling is required. And if you want to leave your laptop behind, the USB Viewer feature allows you to screen program material accessed from a USB drive. You can even project images onto objects like spheres or cylinders or into corners via the Geometric Correction function. The Active Lens Cover acts like a pause shutter in case you want to halt video and audio briefly to illustrate a point. While there's a powerful 10W built-in speaker, there's also a variable audio output for an external speaker in case you need to reach a larger crowd. The NP-M300X's wide connectivity also includes HDMI, a monitor output and USB.
You can also monitor and control the NP-M300X from just about anywhere in the world there's a connection to the Internet. That's because this projector is network ready. Plug it into your LAN via its RJ-45 jack and you can remotely monitor and control it from anywhere on your local network or across the Internet. You can even have it email you when it detects a fault or the projector lamp is nearing the end of its life. Closed Captioning, from program sources that provide it, is ideal for the hearing-impaired or for any noisy environment like gyms, trade shows or conventions. One of the NP-M300X's most important features is its energy efficiency. In ECO mode lamp life shoots up to 6,000 hours while fan noise drops from 34dB to a minimal 27dB.
The NP-M300X actually has a carbon savings meter that can optionally project session and total CO2 emissions saved due to ECO mode use at the beginning and end of each presentation when ECO mode is used. You can turn ECO mode off and on with one button on the remote. Other energy saving features include quick start (three to four seconds) and quick shutdown (which requires no additional cool-down time after the projector is turned off). In addition the projector can turn on automatically when it detects a computer signal and turn off automatically when it detects no signal from any input.
Power, professional features and functionality at a very reasonable price make the NEC NP-M300X hard to beat.
Essential Features for Educational Facilities
Plug and Play intuitive setup and operation
Bright images easily viewed in any application
Versatile, color-coded connections to computer, video sources and external monitor
Automatic keystone correction technology instantly projects a square image even when the projector is set up at a steep offset angle to the screen
Autosense intuitively syncs the projector with most computer signals and features one-touch image optimization
One-touch source changes and complete menu control using the intuitive projector keypad
Powerful 10W speaker provides volume needed for large rooms
Remarkable contrast ratio (2,000:1) enhances your image
Virtual Remote (DDC / CI) over the VGA cable to control the projector directly from a computer without the need for additional control cables
Top Cover Lamp Change
Top cover lamp change provides for easy lamp changes without removal of the projector from the mount
Wall Color Correction
Built-in wall color correction presets provide for adaptive color tone correction to display properly on non-white surfaces
Designed with the Environment In Mind
Extended lamp life with ECO mode technology increases lamp life up to 6,000 hours, while lowering power consumption
Power Management enables projector to automatically turn off when an incoming signal is not detected from any of the inputs
Auto Power On via the RGB (15-pin) input connector when a signal is detected from a computer
Carbon Savings Meter calculates the positive effects of operating the projector in ECO mode, which is encouraged by an optional message at startup. A green ECO mode button on the remote control makes the switch easy
Quick start (3 to 4 seconds) lets you begin presenting in seconds while quick shutdown (immediate power off with no cooling required after shutdown) ensures efficient energy usage
Sleep timer can be set to automatically turn off the projector at set countdown times
Low power consumption (0.2W in stand-by mode) minimizes energy costs
6,000 Hour Filter Life
NEC is committed to designing its products to provide long lifecycles. This commitment even extends to components within its products, including the improved filter. This virtually maintenance-free filter reduces the frequency at which cleaning is required, thereby decreasing your total cost of ownership
Active Lens Cover
This cover enables presenters to immediately mute the audio and video, then seconds later lower the lamp brightness to 25% for a short period of time
Projecting an image isn't confined to a standard flat screen or wall with the NEC Portable Series. Geometric correction allows these models to project an image on spheres, cylinders, corner angles and many more non-standard surfaces
DICOM Simulation enables users in medical environments to display accurate diagnostic images
Enhanced keystone correction allows for horizontal, vertical and diagonal image correction for aligned images even when the projector is set up at an angle to the screen
Get Connected with a Wide Selection of Inputs
Dual computer inputs ensure quick switching between presentations
Four audio inputs (two mini stereo, R / L and HDMI) make it easy to add sound to enhance your presentations
HDMI with HDCP for connecting to high definition sources such as Blu-ray players, cable boxes, satellite receivers and personal computers
Connect your laptop or PC directly to the projector using the USB port and a standard USB cable
In instances when you'd prefer to leave your laptop behind for a presentation, Portable Series projectors can deliver a solution. Using the presentation conversion software included with your projector, simply place your file onto a USB drive and plug it into the projector's USB port. This allows you to display images stored as JPEGs from optional USB memory
10W Speaker with Variable Audio Out
A powerful 10W speaker provides volume needed for large rooms. But if it's not enough, variable audio out enables you use the remote to adjust the volume of self-powered external speakers that are connected to the projector. In stand-by mode, the audio out stays active, allowing the last input used to pass to the self-powered external speakers
Easy control from remote allows you to adjust lamp mode, aspect ratio, volume and image all with the touch of a button
Advanced Networking Capabilities
Integrated RJ-45 connection for quick connection to the LAN (10 / 100 base-T capability)
Remote diagnostics enable the user to monitor and make adjustments to the projector remotely
PC CTL 4.0 controls the power switching input selection and other functions while managing lamp usage and a variety of other vital information over the network. Email notification and projector scheduling for better asset management are included with the software.
Advanced AccuBlend ensures detailed images when non-native resolution sources are connected to the projector
64-step image magnification with location control
Countdown sleep timer can be set to automatically turn off the projector
Direct Power-off provides instantaneous shutdown of projector
Compatible with World Video and Power Standards
The NP-M260X can handle NTSC at Standard (480i) and Enhanced (480p) resolutions and it can handle HDTV (720p, 1080i) resolutions too. It can also accept PAL, PAL60, PAL-N, PAL-M and SECAM signals. And its 100 - 240 V AC 50 / 60 Hz power supply will work in most countries the world over.
| General |
| Device Type || LCD projector |
| Built-in Devices || Speaker |
| Width || 13.3 in |
| Depth || 10.1 in |
| Height || 3.9 in |
| Weight || 6.4 lbs |
| Projector / Panel |
| Image Brightness || 3000 ANSI lumens |
| Image Contrast Ratio || 2000:1 |
| Image Size || 25.2 in - 299 in |
| Projection Distance || 2 ft - 45 ft |
| Throw Ratio || 1.3 - 2.2 :1 |
| Resolution || XGA (1024 x 768) (native) / 1600 x 1200 (resized) |
| Native Aspect Ratio || 4:3 |
| Max Sync Rate (V x H) || 120 Hz x 100 kHz |
| Lamp Type || 180 Watt |
| Lamp Life Cycle || 5000 hour(s) / 6000 ns (economic mode) |
| Controls / Adjustments || Keystone correction, aspect control |
| Features || Eco-Mode technology, AutoSense technology, Advanced AccuBlend technology, Colour Management System, freeze frame, Micro Lens Array (MLA) Technology, JPEG photo playback, wall color correction, Auto Vertical Keystone, Deep Color |
| Projector Lens System |
| Focus Type || Manual |
| Lens Aperture || F/1.7-2.2 |
| Zoom Factor || 1.7x |
| Keystone Correction Type || Digital |
| Keystone Correction Direction || Vertical |
| Vertical Keystone Correction || -30 / +30 |
| Video Input |
| Analog Video Format || NTSC, SECAM, PAL, PAL-N, PAL-M, NTSC 4.43, PAL 60 |
| Analog Video Signal || RGB, S-Video, composite video |
| Digital Video Standard || High-Definition Multimedia Interface (HDMI) |
| Video Modes || 480p, 720p, 1080i, 1080p, 480i, 576i, 576p |
| Audio Output |
| Type || Speaker(s) - integrated |
| Sound Output Mode || Mono |
| Output Power / Channel || 10 Watt |
| Input Device |
| Type || Remote control - external - wireless |
| Expansion / Connectivity |
| Interfaces || 2 x VGA / component video input - 15 pin HD D-Sub (HD-15) 1 x VGA output - 15 pin HD D-Sub (HD-15) 1 x HDMI input - 19 pin HDMI Type A 1 x composite video input - RCA 1 x S-video input - 4 pin mini-DIN 1 x audio line-in - RCA phono x 2 2 x audio line-in - mini-phone stereo 3.5 mm 1 x audio line-out - mini-phone stereo 3.5 mm 1 x serial RS-232 - 9 pin D-Sub (DB-9) 1 x network - RJ-45 1 x USB - 4 pin USB Type B 2 x Hi-Speed USB - 4 pin USB Type A |
| Miscellaneous |
| Included Accessories || Carrying case, lens cover |
| Cables Included || 1 x VGA cable - 6 ft |
| Security Features || Security lock slot (cable lock sold separately), password protection, control panel lock, security bar |
| Compliant Standards || CSA, NOM, ICES-003 Class B, FCC Part 15 B, DDC/CI, UL 60950-1 |
| Power |
| Power Device || Power supply - internal |
| Voltage Required || AC 120/230 V ( 50/60 Hz ) |
| Power Consumption Operational || 248 Watt |
| Power Consumption Operational ( Standby ) || 8 Watt |
| Software / System Requirements |
| Software Included || Drivers & Utilities |
| Manufacturer Warranty |
| Service & Support || 2 years warranty |
| Service & Support Details || Limited warranty - parts and labor - 2 years Limited warranty - lamp - 1 year / 500 hours |
| Environmental Parameters |
| Min Operating Temperature || 41 °F |
| Max Operating Temperature || 104 °F |
| Humidity Range Operating || 20 - 80% (non-condensing) |
| Sound Emission || 34 dB |
| Sound Emission (Economic Mode) || 27 dB |
This item is brand new and comes with a full manufacturer warranty. Please refer to the table below for details
Don't Gamble on a break-down!
- 100% Parts and Labor
- No Deductibles
- No Lemon Guarantee
- Fully Transferable
- Toll-Free Support
- Worry Free For Up to 5 Years
- Nationwide Coverage
- Rapid Claim System
- Electronic Registration
||Extended Service Plan
||Typical Manufacturer Warranty
|Up to 5 Years including parts and labor
||1 Year Parts, 90 Days Labor
Wear and Tear(Normal Use)
Product Replacement (If Product Cannot be Fixed)
Optional Accidental Damage
Screen or Lens Replacement
24/7 Toll Free Help
No Lemon Policy
Authorized Service Centers in Most Locations
What exactly is an Extended Service Plan?
An extended service plan is generally an extension of your original manufacturer's warranty. Most manufacturers warranty their products to be free from defects for up to one year from the date of purchase. This warranty virtually guarantees you that if your newly purchased product fails, the manufacturer will protect you from the high costs of replacement parts and labor necessary to repair your product. Extended service plans lengthen your product's coverage for up to an additional 60 months (5 years) to insure you get years of performance satisfaction from your newly purchased product.
How is this different than the manufacturer's warranty?
A manufacturer's warranty usually offers limited coverage for a limited time, with parts and labor carrying separate lengths of coverage. For example, a common manufacturer warranty of a product might cover a consumer for one full year on parts defects but only 90 days on the high cost of labor involved to change those parts. Extended service plans provide comprehensive, long term, even length coverage. This means that should your product fail within your plans coverage time frame, both parts and labor costs are covered.
How do I buy an Extended Service Plan?
Extended Service Plans can be purchased along with your product online, or via our toll free number.
Can I renew my Consumer Priority Service extended service plan?
Yes, service plans are renewable and must be submitted 30 days prior to the original plans expiration. Please contact a sales representative to discuss your renewal options.
What should I do if I need extended service?
Our extended service providers offer an easy to use interactive form online which you may use to request that they initiate a claim on your product. Your other alternative is to call the toll-free number on your extended warranty card or email and have a qualified representative make this request for you with the information you will provide. We believe that our claim initiation request process is the absolute best our industry has to offer. It is designed for simplicity and speed.
Who will perform the service on my product?
Our company works with over 11,000 authorized service professionals. Each technician is extensively trained by the respective manufacturers to provide service on your products. Authorized technicians must complete annual and bi-annual continued education exams in addition to being well versed in manufacturer supplied update bulletins to ensure their level of expertise is as current as the new products which come to market. We urge our customers to provide feedback regarding their experiences which we later use to insure that the level of service we are expected to provide is exactly the level of service you receive.
May I transfer my extended service plan to another person?
Our service plans are 100% transferable. If you would like transfer ownership of the covered product along with its coverage, we require that the request be supplied in writing. For assistance please contact a Representative. Please have all of the new owner's information at hand when requesting a transfer.
Will I have to pay a deductible or any other "hidden costs"?
Generally, the amount of a deductible is almost always proportional to the amount of the premium charged. In order to have a lower deductible, even as low as $0, the plan holder would generally have to agree to a higher premium. For those who want lower premiums, they must agree to a higher deductible. Our extended service plans carry a $0.00 deductible along with low premiums. This means that with an extended service plan there are no high upfront costs and they are committed to cover 100% parts and labor costs on any authorized claim.