The Mitsubishi HC4000 HD Projector is an attractive solution for movie fans desiring a genuine cinema experience at home. The saturating BrilliantColor technology and DLP DarkChip system promote authentic color reproduction and high-contrast with deep blacks. Friends will be envious of the striking 1300 ANSI Lumens of brightness and vivid six-segment color wheel. The HC4000 combines amazing full HD picture quality, endless features and ultra flexibility in a portable unit that would impress even the most demanding critics.
Designed to thrive in any space, the HC4000 is a malleable projector. Its BrilliantColor technology not only provides true-to-life color reproduction, but also allows you to adjust colors individually through the built-in Color Management System. The full HD zoom lens generates smooth gradations for dark tones, resulting in deep blacks even during the day.
The HC4000's flexibility also facilitates seamless integration into any home theater. An HDMI 1.3 terminal affords pristine, uncompressed digital audio/video via a single cable with no information loss. The analog video inputs consist of RCA and S-video composite jacks and an RCA component jack as well. An RGB terminal is included for computer connection and there's even an RS232C control terminal that supports third party operation from various devices.
The HC4000 has a diamond lens with a 1.5x manual zoom. This lets you adjust the screen size without changing the projection distance, which is great if you have limited space or want to match your screen and display perfectly. Even if your home theater is threatened by tight spaces and small rooms, the HC4000 is equipped with rear screen projection, ceiling mount capabilities and a short-throw ratio. Zoomed wide to its shortest focal length, the HC4000 can project a 50" diagonal image from less than five feet away.
For convenience and ease of operation, the HC4000 has an ultra-quiet noise level and a top access door for the lamp. The amazingly quiet 25 dBA low mode operating noise limits audible distractions and the top-loading access door simplifies maintenance.
Whether you have an entire basement to construct your dream home-theater or just a small entertainment room, the HC4000 has the features and technology to adapt to your individual needs. Its flexibility and superior picture quality can turn virtually any space into your very own cinema.
Full HD 1080p Resolution
The HC4000 projects in full HD with 1080 vertical lines of display resolution in a progressive scan, meaning the entire screen is refreshed on every pass. The video signal beam does not skip alternate lines, but fills in each line every time, which tends to render smoother motion sequences
DLP DarkChip3 Technology
DarkChip3 technology provides true reproduction of the digital source into finely detailed images with no noise or deterioration. Densely embedded micro mirrors built into the HC4000 improve the aperture ration of the 0.65" DLP chip. Every detail is authentically reproduced including image depth, deep blacks and contrast
HDMI 1.3 Connectivity
With HDMI 1.3, bandwidth speed has been increased and Deep Color is supported, which results in stunning rendering of over one billion colors. The signal passes through uncompressed without information loss. The single cable for video/audio is also convenient for quick connection and limits unsightly knots of cable
Anamorphic Mode Support
With Anamorphic Mode Support, it is possible to use the anamorphic lens compatibility to provide the lens appropriate to the media being projected. Anamorphic Mode 1 is suitable for viewing 2.35:1-size images and Anamorphic Mode 2 is suitable for viewing 16:9 / 4:3-size images or images input from personal computers
BrilliantColor With Color Management
This projector uses a six-segment color wheel, which enables far more realistic color reproduction - especially in the yellow and light blue hues. Plus, with Color Management you can individually adjust each tone in red, yellow, green, cyan, blue and magenta
Diamond Lens With Manual Focus & Zoom
The HC4000 utilizes a 4-cluster, 13-piece all-glass lens. It provides excellent focusing performance and a zoom ratio of 1.5:1. The aperture is 3.0 - 3.5 and the focal length is 20.6 - 30.1 mm. Having manual zoom allows you to adjust screen size without having to change the projector distance, which is a convenient feature for matching display size to screen size and correcting minor installation errors when ceiling mounting
Keystone is a distortion of the image caused by projecting at the wrong vertical angle. Digital keystone correction produces an inverse effect that cancels this distortion
With a throw ratio of 1.38 - 2.06, the HC4000 can project a 50" diagonal image from less than five feet away. This helps when utilizing the projector in tighter spaces and with rear screen projection
Ultra-Quiet Noise Level
In low mode, the HC4000 outputs an amazing quiet 25 dBA noise level. Instead of distracting equipment noise, you can enjoy your full HD picture display
This terminal affords the convenience of remote operation of projectors from third party control devices
Top Access Lamp
Due to top door access, the lamp can be replaced without turning the projector around or over when mounted on the ceiling or resting on a shelf - simplifying the replacement process
Long Lamp Life
In low mode, the lamp can last up to 5000 hrs. This provides owners plenty of relaxing entertainment with minimal maintenance
This is designed for prevention of theft, wrong operation by children and restriction on operation by other than specified users. The password function has two modes. Display Input Mode is used when the projector is turned on. The startup screen will appear and can't be removed without the password. Menu Access Mode disables all projector buttons except for the On/Off switch until the password is entered
Kensington Lock Compatible
This projector has a Kensington Security Standard connector for use with Kensington MicroSaver Security System (sold separately)
| General |
| Device Type || DLP projector - High Definition 1080p |
| Width || 13.6 in |
| Depth || 5.1 in |
| Height || 10.6 in |
| Weight || 7.9 lbs |
| Projector / Panel |
| Image Brightness || 1300 ANSI lumens |
| Image Contrast Ratio || 4000:1 |
| Throw Ratio || 1.38 - 2.06:1 |
| Resolution || 1920 x 1080 (native) / 1920 x 1200 (resized) |
| Native Aspect Ratio || Widescreen |
| Video Bandwidth || 170 MHz |
| Max Sync Rate (V x H) || 85 Hz x 80 kHz |
| Lamp Type || 230 Watt |
| Lamp Life Cycle || 5000 hour(s) (economic mode) |
| Features || BrilliantColor, DarkChip3 single-chip DLP technology |
| Projector Lens System |
| Focus Type || Manual |
| Zoom Type || Manual |
| Zoom Factor || 1.5x |
| Keystone Correction Direction || Vertical |
| Vertical Keystone Correction || -15 / +15 |
| Video Input |
| Analog Video Format || NTSC, SECAM, PAL, PAL-N, PAL-M, NTSC 4.43, PAL 60 |
| Analog Video Signal || RGB, S-Video, composite video, component video |
| Digital Video Standard || High-Definition Multimedia Interface (HDMI) |
| Video Modes || 480p, 480i, 576i, 576p, 1080/24p, 1080/60i, 720/60p, 1080/50i, 720/50p, 1080/50p, 1080/60p |
| Input Device |
| Type || Remote control - external - wireless |
| Movement Detection Technology || Infrared |
| Expansion / Connectivity |
| Interfaces || 1 x HDMI - 19 pin HDMI Type A 1 x VGA input - 15 pin HD D-Sub (HD-15) 1 x S-video input - 4 pin mini-DIN 1 x composite video input - RCA 1 x component video input - RCA x 3 1 x serial RS-232C - 8 pin mini-DIN ( management ) |
| Miscellaneous |
| Included Accessories || Lens cover |
| Cables Included || 1 x VGA cable |
| Security Features || Security lock slot (cable lock sold separately) |
| Power |
| Power Device || Power supply - internal |
| Voltage Required || AC 120 V ( 50/60 Hz ) |
| Power Consumption Operational || 340 Watt |
| Power Consumption Operational ( Standby ) || 0.5 Watt |
| Software / System Requirements |
| Software Included || Drivers & Utilities |
| Manufacturer Warranty |
| Service & Support || 2 years warranty |
| Service & Support Details || Limited warranty - parts and labor - 2 years Limited warranty - lamp - 1 year / 500 hours |
| Environmental Parameters |
| Sound Emission || 31 dBA |
| Sound Emission (Economic Mode) || 25 dBA |
2 x AA Batteries
Lamp Replacement Attachment
CD-ROM User Manual
2-Year Limited Warranty (Parts & Labor)
500-Hours Or 1-Year Lamp Warranty (Whichever Comes First)
This item is brand new and comes with a full manufacturer warranty. Please refer to the table below for details
Don't Gamble on a break-down!
- 100% Parts and Labor
- No Deductibles
- No Lemon Guarantee
- Fully Transferable
- Toll-Free Support
- Worry Free For Up to 5 Years
- Nationwide Coverage
- Rapid Claim System
- Electronic Registration
||Extended Service Plan
||Typical Manufacturer Warranty
|Up to 5 Years including parts and labor
||1 Year Parts, 90 Days Labor
Wear and Tear(Normal Use)
Product Replacement (If Product Cannot be Fixed)
Optional Accidental Damage
Screen or Lens Replacement
24/7 Toll Free Help
No Lemon Policy
Authorized Service Centers in Most Locations
What exactly is an Extended Service Plan?
An extended service plan is generally an extension of your original manufacturer's warranty. Most manufacturers warranty their products to be free from defects for up to one year from the date of purchase. This warranty virtually guarantees you that if your newly purchased product fails, the manufacturer will protect you from the high costs of replacement parts and labor necessary to repair your product. Extended service plans lengthen your product's coverage for up to an additional 60 months (5 years) to insure you get years of performance satisfaction from your newly purchased product.
How is this different than the manufacturer's warranty?
A manufacturer's warranty usually offers limited coverage for a limited time, with parts and labor carrying separate lengths of coverage. For example, a common manufacturer warranty of a product might cover a consumer for one full year on parts defects but only 90 days on the high cost of labor involved to change those parts. Extended service plans provide comprehensive, long term, even length coverage. This means that should your product fail within your plans coverage time frame, both parts and labor costs are covered.
How do I buy an Extended Service Plan?
Extended Service Plans can be purchased along with your product online, or via our toll free number.
Can I renew my Consumer Priority Service extended service plan?
Yes, service plans are renewable and must be submitted 30 days prior to the original plans expiration. Please contact a sales representative to discuss your renewal options.
What should I do if I need extended service?
Our extended service providers offer an easy to use interactive form online which you may use to request that they initiate a claim on your product. Your other alternative is to call the toll-free number on your extended warranty card or email and have a qualified representative make this request for you with the information you will provide. We believe that our claim initiation request process is the absolute best our industry has to offer. It is designed for simplicity and speed.
Who will perform the service on my product?
Our company works with over 11,000 authorized service professionals. Each technician is extensively trained by the respective manufacturers to provide service on your products. Authorized technicians must complete annual and bi-annual continued education exams in addition to being well versed in manufacturer supplied update bulletins to ensure their level of expertise is as current as the new products which come to market. We urge our customers to provide feedback regarding their experiences which we later use to insure that the level of service we are expected to provide is exactly the level of service you receive.
May I transfer my extended service plan to another person?
Our service plans are 100% transferable. If you would like transfer ownership of the covered product along with its coverage, we require that the request be supplied in writing. For assistance please contact a Representative. Please have all of the new owner's information at hand when requesting a transfer.
Will I have to pay a deductible or any other "hidden costs"?
Generally, the amount of a deductible is almost always proportional to the amount of the premium charged. In order to have a lower deductible, even as low as $0, the plan holder would generally have to agree to a higher premium. For those who want lower premiums, they must agree to a higher deductible. Our extended service plans carry a $0.00 deductible along with low premiums. This means that with an extended service plan there are no high upfront costs and they are committed to cover 100% parts and labor costs on any authorized claim.