Klark-Teknik SQ1D

SQ1D Eight Channel Dynamics Processor

Quick Specs:
Model
Brand: Klark-Teknik
SKU: SQ1D






Print Print Email Email Add to Wishlist Add to Wishlist

Klark-Teknik SQ1D

Klark-Teknik SQ1D Eight Channel Dynamics Processor
Shipping: FREE
Total Price: $1,640.00

Qty:
Rating: (Write a Review)
SKU: SQ1D
Condition: Brand New Factory Sealed With 1 Year USA Warranty
Shipping Methods:
Availability: Available [Details]


Additional Ways to Save Other Payment Options

View all payment options Google/Paypal Checkout


The Dynamics Processor shall provide eight complete channels of either
compression or gating, with push button selection and LED status indication
of operational mode on an
individual channel basis. The compressor section on each channel shall
provide for adjustment of Threshold, Make-Up Gain, Attack and Release times
and Ratio. There shall be push button selection of RMS or Vintage Emulation
(Peak) response and push button selection of Soft or Hard knee mode on each
channel.

Klark-Teknik SQ1D Description:

The Dynamics Processor shall provide eight complete channels of either
compression or gating, with push button selection and LED status indication
of operational mode on an
individual channel basis. The compressor section on each channel shall
provide for adjustment of Threshold, Make-Up Gain, Attack and Release times
and Ratio. There shall be push button selection of RMS or Vintage Emulation
(Peak) response and push button selection of Soft or Hard knee mode on each
channel.
The gate section on each channel shall provide for adjustment of Threshold,
Attack, Hold and Release times and Range. The Threshold, Attack and Release
controls
shall be operable by the same rotary control knobs in compression and gating
modes. Control of Ratio and Range shall be performed using the same rotary
control
knob. There shall be individual rotary control knobs for Make-Up Gain and
Hold. Each channel shall have a six-segment input
level meter and a ten-segment attenuation depth meter, which will show the
gain reduction being applied in both compression
and gating modes. Each channel shall have a sidechain bandpass filter with a
rotary control knob for frequency control and shall be enabled by
a push button switch. The band-pass filter shall have two different
bandwidth settings, selectable by a push button switch. There
shall be provision for an external sidechain input selected by the External
Key switch with LED status indication.
The Bypass switch shall set the signal path to unity gain on each channel
and provide LED status.
Each channel shall have a Solo switch with LED status indication that sends
the sidechain signal to the Solo Bus Output connector.
A Solo Bus Input connector shall allow multiple Dynamics units to be chained
together to form a common Solo
Bus Output. The Side Chain Solo In Place switch shall have LED status
indication and change the function of each Solo switch; when selected
the sidechain signal shall be sent to the channel output connector instead
of the Solo Bus Output.
The Dynamics Processor shall have the ability to link the operation of any
number of adjacent channels, which shall all be summed
into the sidechain of the left-hand linked channel which shall control the
gain of each of the linked channels. The selection of
either compression or gating for the left-hand linked channel shall override
the push button settings for all channels linked to it.
A Power On Led shall be provided.
The Dynamics Processor shall meet or exceed the following specifications:
Distortion: (THD+N) <0.02% @1kHz, +4dBu; Frequency response: 0.5dB
(20Hz-20kHz); Dynamic Range (20Hz-20kHz unweighted) >117dB.
Each channel shall have XLR connectors for the input and output and a 1/4
TRS jack socket for the external side chain input. All audio connections
shall be electronically balanced.
The Dynamics Processor shall be 19 standard rack mountable and 3U high.
The Dynamics Processor shall be capable of operating from a 100-240V 10%
50/60Hz a.c. power source.
The Dynamics Processor shall be the Klark Teknik Square ONE Dynamics, and no
alternative specification option is available.

Klark-Teknik SQ1D Specifications:

* Dynamics Inputs Eight
* Type Electronically balanced XLR (pin 2 hot)
* Impedance (O) 10k
* Ext Key Inputs Eight
* Type Electronically balanced TRS Jack (Tip hot)
* Impedance (O) 20k
* Solo Bus Input One
* Type Electronically balanced XLR (pin 2 hot)
* Impedance (O) 20k
* Dynamics Outputs Eight
* Solo Bus Output One
* Type Electronically balanced XLR (pin 2 hot)
* Minimum load impedance 600O
* Source impedance <60 O
* Maximum level +22dBu into >2kO
* Performance
* Frequency response 20Hz 20kHz 0.5 dBu
* Distortion (THD+N) <0.02% @ 1kHz, +4 dBu
* Noise Floor <-95 dBu @ Unity Gain
* Dynamic range (20Hz-20kHz unweighted) >117 dB
* Compressor
* Threshold (Hard Knee) -50dB to +25dBu
* Gain 0dB to +30dB
* Attack 100us to 20ms
* Release 50ms to 2.5s
* Ratio 8 to 1:
* Gate
* Threshold -50dB to +25dBu
* Attack 10 s to 10ms
* Release 2ms to 2s
* Hold 2ms to 2s
* Range 8 to 0dB
* Sidechain Bandpass filter
* Frequency Range 40Hz -16kHz
* Slope (Wide) 6dB per Octave
* Terminations
* Audio 3-pin XLR and 1/4 TRS jack
* Power 3-pin IEC
* Power Requirements
* Voltage 100V-240V a.c. 10%
* Consumption <35W
* Dimensions
* Height 133mm (5.25 inch) 3U High
* Width 482mm (19 inch)
* Depth 205mm (8 inch)
* Weight
* Nett 4.4kg
* Shipping 5.4kg

Klark-Teknik SQ1D Reviews & Ratings



No Reviews Found

Shipping Methods & Details


  • Please enter your shipping ZIP Code to get available shipping methods and cost:


This item is brand new and comes with a full manufacturer warranty. Please refer to the table below for details

Warranty Center


Don't Gamble on a break-down!


Membership Benefits:
  • 100% Parts and Labor
  • No Deductibles
  • No Lemon Guarantee
  • Fully Transferable
  • Toll-Free Support
  • Worry Free For Up to 5 Years
  • Nationwide Coverage
  • Rapid Claim System
  • Electronic Registration

Coverage/Features Extended Service Plan Typical Manufacturer Warranty
Coverage Length
Up to 5 Years including parts and labor 1 Year Parts, 90 Days Labor
Wear and Tear(Normal Use)
Yes -
Product Replacement (If Product Cannot be Fixed)
Yes -
Power Surges
Yes -
Optional Accidental Damage
Yes -
Screen or Lens Replacement
Yes -
Worldwide
Yes -
Transferrable
Yes -
24/7 Toll Free Help
Yes -
No Lemon Policy
Yes -
Authorized Service Centers in Most Locations
Yes -



What exactly is an Extended Service Plan?
An extended service plan is generally an extension of your original manufacturer's warranty. Most manufacturers warranty their products to be free from defects for up to one year from the date of purchase. This warranty virtually guarantees you that if your newly purchased product fails, the manufacturer will protect you from the high costs of replacement parts and labor necessary to repair your product. Extended service plans lengthen your product's coverage for up to an additional 60 months (5 years) to insure you get years of performance satisfaction from your newly purchased product.

How is this different than the manufacturer's warranty?
A manufacturer's warranty usually offers limited coverage for a limited time, with parts and labor carrying separate lengths of coverage. For example, a common manufacturer warranty of a product might cover a consumer for one full year on parts defects but only 90 days on the high cost of labor involved to change those parts. Extended service plans provide comprehensive, long term, even length coverage. This means that should your product fail within your plans coverage time frame, both parts and labor costs are covered.

How do I buy an Extended Service Plan?
Extended Service Plans can be purchased along with your product online, or via our toll free number.

Can I renew my Consumer Priority Service extended service plan?
Yes, service plans are renewable and must be submitted 30 days prior to the original plans expiration. Please contact a sales representative to discuss your renewal options.

What should I do if I need extended service?
Our extended service providers offer an easy to use interactive form online which you may use to request that they initiate a claim on your product. Your other alternative is to call the toll-free number on your extended warranty card or email and have a qualified representative make this request for you with the information you will provide. We believe that our claim initiation request process is the absolute best our industry has to offer. It is designed for simplicity and speed.

Who will perform the service on my product?
Our company works with over 11,000 authorized service professionals. Each technician is extensively trained by the respective manufacturers to provide service on your products. Authorized technicians must complete annual and bi-annual continued education exams in addition to being well versed in manufacturer supplied update bulletins to ensure their level of expertise is as current as the new products which come to market. We urge our customers to provide feedback regarding their experiences which we later use to insure that the level of service we are expected to provide is exactly the level of service you receive.

May I transfer my extended service plan to another person?
Our service plans are 100% transferable. If you would like transfer ownership of the covered product along with its coverage, we require that the request be supplied in writing. For assistance please contact a Representative. Please have all of the new owner's information at hand when requesting a transfer.

Will I have to pay a deductible or any other "hidden costs"?
Generally, the amount of a deductible is almost always proportional to the amount of the premium charged. In order to have a lower deductible, even as low as $0, the plan holder would generally have to agree to a higher premium. For those who want lower premiums, they must agree to a higher deductible. Our extended service plans carry a $0.00 deductible along with low premiums. This means that with an extended service plan there are no high upfront costs and they are committed to cover 100% parts and labor costs on any authorized claim.