The JVC DT-V17G1Z Verite 17" 3G HD-SDI/SDI Studio Monitor brings an impressive set of professional features to a 1366 x 768 monitor that won't bust your budget. Its 3G and dual-link HD/SD-SDI inputs allow use of the full 4:4:4 color space while monitoring 1080/60p video. Meanwhile, the 10-bit processing and non-glossy LCD panel combine to provide highly accurate color reproduction. This is key when grading or matching footage in critical monitoring applications such as broadcast, studio, mobile, and location work. Another professional touch is the inclusion of a built-in waveform monitor, scalable vectorscope, time code support, tally lamp, safety markers, and advanced audio level metering. Any way you look at it, the DT-V17G1Z has you covered.
3G/Dual Link Ready
1080p uncompressed digital video data transmitted at a maximum rate of 60 frames per second at 3 GB/second can be input with one HD-SDI input. Dual Link is available through two HD-SDI inputs.
IPS LCD Panel
IPS (In-Plane Switching) panels provide wide viewing angles and excellent color reproduction. The crystal molecules move parallel to the panel plane instead of perpendicular to it, reducing the amount of light scattering in the matrix. This results in minimal color change regardless of viewing position.
Gamma Mode Preset
Various pre-set gamma modes (2.2, 2.35, 2.45, 2.6) are offered to meet your application needs.
High-quality vectorscope allows simple checking of hue and saturation of digital video signals. Hue and saturation of color signal are detected and displayed as a vector with resolution of 254 x 254. Compatible with video, component, SDI (SD/HD), DVI (except PC signals) input signals, and offers a double-size display option and selection of display position or translucence functions.
Detects video, component (excepting RGB), SDI, DVI (except PC) brightness signals and displays them with resolution of 360 x 254 for SD signals or 480 x 254 for HD signals. It is also possible to perform checks at the color signal level of each color per screen for R/G/B, Y/PB/PR, Y/CB/CR. Over-level function enables peak brightness to be checked at a glance. The display allows a double-size display option, and selection of display position or translucence functions.
Advanced Audio Level Meter
The channel number is displayed in each level bar. Plus you can check the status of the audio signal at a glance for Reference Level/Over Level 0 dB, three set levels, and peak hold function.
Digital & Analog Closed Captioning
EIA-608/708 DTV Closed Captioning is supported via HD-SDI inputs. Analog closed captions can also be monitored when signals are input via composite video connection.
| Signal System || NTSC/PAL |
| Monitor Type || LCD |
| Screen Size || 17" |
| Resolution || 1366 x 768 |
| Viewing Angle || 178° |
| Brightness || 350cd/m² |
| Contrast Ratio || 900:1 |
| Inputs/Outputs || HD/SD-SDI: BNC (x2 Input, x2 Output) |
DVI: DVI-D (x1 Input)
Component: BNC (x1 Input, x1 Output)
Composite: BNC (x1 Input, x1 Output)
Analog Audio: RCA L/R (x1 Input)
Audio Monitor: RCA L/R (x1 Output)
External Control: 8-pin RJ-45
RS-485: 8-pin RJ-45 (x2 Input, x2 Output)
RS-232C: 9-pin D-sub
| Remote Control || Optional (RS-232C, RS-485) |
| Power Requirements || 120VAC, 60Hz / 12-17VDC |
| Power Consumption || 1.2A (120VAC) |
| Dimensions (WxHxD) || w/ Stand: 17 x 13.8 x 7.9 " (43.2 x 35 x 20 cm) |
w/o Stand: 17 x 12.3 x 4.1" (43.2 x 30.9 x 10.2 cm)
| Weight || w/ Stand: 18.9 lbs (8.6kg) |
w/out Stand: 15 lbs (6.8kg)