The
SB2A from
Electro-Voice is a high-quality active subwoofer that meets the demand for a lightweight and portable sound system by eliminating the need for external system processing and amplification. The cabinet houses a large 12" driver that is powered by dual 350W amplifiers for a strong, low-distortion performance.
Electro-Voice SB2A Description:
The SB2A from Electro-Voice is a high-quality active subwoofer that meets the demand for a lightweight and portable sound system by eliminating the need for external system processing and amplification. The cabinet houses a large 12" driver that is powered by dual 350W amplifiers for a strong, low-distortion performance.
The speaker output is switchable, allowing you to drive an 8 Ohm passive subwoofer or a full-range loudspeaker. The rear panel of the subwoofer features an XLR/TRS combo input, a balanced XLR output, and a Neutrik Speakon high-current output. The top of the cabinet has a standard pole mount socket so you can mount a small full-range speaker on top of it.
Electro-Voice SB2A Features:
- Compact and portable design
- Eliminates the need for external processors and amplifiers
- Cast frame high-excursion 12" driver
- Dual 350W amplifier channels
- Dedicated electronic crossover
- Switchable high-pass filter allows you to connect either a passive 8 Ohm subwoofer or a full-range loudspeaker
- XLR/TRS input jack, XLR output, and a Neutrik Speakon high-current output
- Integrated carrying handle
- Pole mount socket on top of the cabinet
Electro-Voice SB2A Specifications:
| Driver | 12" (305mm) Cast Frame High-Excursion Driver |
| Amplifier | 350W (Subwoofer Amp Power)
350W (Switchable Amp Power) |
| Crossover | Integrated Electronic Crossover |
| Frequency Range | 55 to 165Hz (-3dB)
43 to 275Hz (-10dB) |
| Maximum Sound Pressure Level (SPL) | Not Specified by Manufacturer |
| Connectors | 1 x Power Input
1 x XLR/TRS Combo Input
1 x XLR Output
1 x Neutrik Speakon Output |
| Input Impedance | Not Specified by Manufacturer |
| Controls and Indicators | 1 x Power Switch
1 x Level Control Knob
1 x Yellow Limit LED
1 x Green Signal LED |
| Stand/Pole Mounts | Pole Mount Bracket on Top of Cabinet |
| Enclosure Material | Copolymer |
| Shielded | Not Specified by Manufacturer |
| Dimensions (HxWxD) | 23.1 x 16.9 x 12.3" (586 x 429 x 312mm) |
| Weight | 35.3 lbs (16kg) |
