The Eiki LC-XB43 is an extremely bright and ultra portable projector, delivering 4500 Lumens and only weighing in at only 7.7 lbs. (3.5 kilograms). The projector includes 3D keystone correction, high contrast ratio, progressive scan, 3 different brightness levels, HDTV compatible, projection is possible in any vertical tilt of the projector and so much more. The LC-XB43 is remote friendly with such features as an integrated LAN function for access virtually anywhere and an e-mail alert function for direct notification of malfunction for easier troubleshooting. With regards to maintenance and performance, the LC-XB43 also hosts some excellent additions such as QuickGo function which self-cools the projector lamp for immediate transportation after the end of the presentation, clog-detect that displays the amount of air-filter contamination, and ECO Mode for eco-friendly and energy saving operation.
Eiki LC-XB43 Features:
4500 ANSI Lumens, 85% uniformity, and 1000:1 contrast ratio.
Weighs less than 8 lbs! Compact, low-profile design!
3 panel LCD imaging delivers a rich, color saturated picture.
XGA resolution. WXGA, UXGA~VGA and MAC compatible.
Quiet operation: fan noise as low as 30 dBA in Eco mode.
Smart data compression / expansion, and video scaling.
Convenient mid-range (1.6:1) manual zoom and focus lens.
Two Dsub15 computer inputs, plus one Dsub15 computer monitor output.
Geometric Keystone Correction. Closed caption decoding (NTSC).
Preset image offset. Auto Vertical digital keystone correction.
Accepts Composite, S, and Component Video in all major standards.
Displays both 4:3 and 16:9 Widescreen. Supports most HDTV resolutions.
Converts Interlace to Progressive scan. 3-2 (and 2-2) Pulldown Support.
Variable Power Management option. Optional local or remote keylock.
Custom warm-up screen image option. Factory defaults reset.
Wireless remote control. 16X digital zoom. Auto input search.
Green chalkboard mode.
3 Year Projector Warranty!
|Connections - Audio Signal Input|
|1.||Inputs 1 & 2 - Stereo: MiniStereo x 1|
|2.||Inputs 3 & 4 - Stereo: RCA x 2|
|Connections - Audio Signal Output|
|1.||Variable, Stereo: MiniStereo x 1|
|Connections - Auxilary Ports|
|RS-232 Control Port||Dsub9 x 1|
|Network Interface Port||RJ45 x 1|
|Connections - Image Signal Input|
|1.||Computer 1 - Dsub15 x 1, or Component Video (with optional adapter)|
|2.||Computer 2 - Dsub15 x 1|
|3.||Compositie Video - RCA x 1|
|4.||S-Video - S-Video x 1|
|Connections - Outputs|
|Computer monitor||Dsub15 x 1|
|Brightness||up-to 4,500 ANSI Lumens|
|Color Reproduction||8-bit (16.7 Million Colors)|
|Contrast Ratio||up-to 1000:1|
|Illumination Uniformity (corner to center)||85%|
|Imaging System||0.8 in (20 mm) Inorganic PolySilicon active matrix TFT Panels x 3|
|Scanning Frequency||Auto: H Sync. 15-100 kHz ~ V Sync. 50-100 Hz|
|Total Pixels||2,359,296 ((1024 x 768 ) x 3)|
|Corner Keystone Correction||Digital: range depends on input signal|
|Formats Supported||Normal 4:3 and Wide Screen 16:9|
|Horizontal Keystone Correction - Digital||up to 30 left or right|
|Image Orientation||Normal, Reversed, Inverted|
|Image Signal Resizing||Smart Scaling Technology|
|Maximum Pitch||up-to 360|
|Projector Elevation Adjustment (legs)||up-to 8.9 Up|
|Vertical Keystone Correction - Digital||up to 40 up or down|
|Vertical Lens Shift (% of image width)||Fixed: 40% Up|
|Estimated Lamp Life Hours||up-to 3,000 Hours|
|Lamp||275 Watts NSHA|
|Focal Length||0.75~1.19 in. (19.2~30.2 mm)|
|Image Diagonal||40~300 in. (101.6~762 cm)|
|Image Width||2.2~20 ft (0.67~6.1 m)|
|Lens Type||Attached - Manual Zoom and Focus|
|Throw Distance (Wide~Tele)||3.0~37.7 ft. (0.93~11.5 m)|
|Zoom Ratio - Max:Min:||1.6:1|
|Computer Input in Pixels||1920x1200~640x480|
|Computer In 4x3 analog||UXGA, SXGA+, SXGA, XGA, SVGA, VGA, MAC|
|Computer In Wide analog||WUXGA,WSXGA+, WXGA+,WXGA|
|Pixel Clock||up-to 140 MHz|
|Local Control||Full Function|
|Remote Control - Projector||Wireless (Infra Red) x 1|
|Video Formats||NTSC / PAL / SECAM / NTSC 4.43 / PAL-M&N|
|Video In analog||480i/p, 575i/p, 720p, 1035i, 1080i|
|Cabinet Size||3.07 x 13.15 x 10.3 in (7.8 x 33.4 x 26.2 cm)(excluding legs)|
|Packaged Size (HxWxD)||10.0 x 16.1 x 14.8 in (25.4 x 40.8 x 37.5 cm)|
|Packaged Weight||13.6 lb. (6.2kg)|
|Weight||7.7 lb. (3.5 kg)|
|Amplifier||Stereo: 1 Watt|
|Speakers (Built-in)||1.1 in (2.8 cm) x 1 (Mono)|
|Power Management||Auto Shutdown|
|Power Requirements||100-240V AC, 50/60 Hz|
|Power Consumption||0.5 W in Standby Eco up to 354 Watts|
|Power Cord||10 ft (3 m) Type C13, Detatchable|
|Generated Heat||1.7 BTU/hr (1.8 kJ/hr) in Eco Standby mode, up-to 1,208 BTU/hr (1,274 kJ/hr)|
|Operating Noise - dBA||as low as 30 dBA|
|Operating Temperature||41~104F (5~40C)|
|Electrical Safety Compliance||UL, cUL, CE|
|Electromagnetic Compatibility||FCC Class B, CE|
|Kensington Security Slot||Yes|
|maintenance||Clean Air Filter, Change Lamp|
|Limited Warranty: to the original end-use customer only - Projector||3 Years|
|Warranty Lamp:||6 Months Ownership / 500 Hours Use (whichever occurs first)|
|Mercury Warning||Lamp contains Mercury. Do not put in trash. Dispose of as Hazardous Waste, according to Local, State or Federal Laws.|
This item is brand new and comes with a full manufacturer warranty. Please refer to the table below for details
Don't Gamble on a break-down!
- 100% Parts and Labor
- No Deductibles
- No Lemon Guarantee
- Fully Transferable
- Toll-Free Support
- Worry Free For Up to 5 Years
- Nationwide Coverage
- Rapid Claim System
- Electronic Registration
||Extended Service Plan
||Typical Manufacturer Warranty
|Up to 5 Years including parts and labor
||1 Year Parts, 90 Days Labor
Wear and Tear(Normal Use)
Product Replacement (If Product Cannot be Fixed)
Optional Accidental Damage
Screen or Lens Replacement
24/7 Toll Free Help
No Lemon Policy
Authorized Service Centers in Most Locations
What exactly is an Extended Service Plan?
An extended service plan is generally an extension of your original manufacturer's warranty. Most manufacturers warranty their products to be free from defects for up to one year from the date of purchase. This warranty virtually guarantees you that if your newly purchased product fails, the manufacturer will protect you from the high costs of replacement parts and labor necessary to repair your product. Extended service plans lengthen your product's coverage for up to an additional 60 months (5 years) to insure you get years of performance satisfaction from your newly purchased product.
How is this different than the manufacturer's warranty?
A manufacturer's warranty usually offers limited coverage for a limited time, with parts and labor carrying separate lengths of coverage. For example, a common manufacturer warranty of a product might cover a consumer for one full year on parts defects but only 90 days on the high cost of labor involved to change those parts. Extended service plans provide comprehensive, long term, even length coverage. This means that should your product fail within your plans coverage time frame, both parts and labor costs are covered.
How do I buy an Extended Service Plan?
Extended Service Plans can be purchased along with your product online, or via our toll free number.
Can I renew my Consumer Priority Service extended service plan?
Yes, service plans are renewable and must be submitted 30 days prior to the original plans expiration. Please contact a sales representative to discuss your renewal options.
What should I do if I need extended service?
Our extended service providers offer an easy to use interactive form online which you may use to request that they initiate a claim on your product. Your other alternative is to call the toll-free number on your extended warranty card or email and have a qualified representative make this request for you with the information you will provide. We believe that our claim initiation request process is the absolute best our industry has to offer. It is designed for simplicity and speed.
Who will perform the service on my product?
Our company works with over 11,000 authorized service professionals. Each technician is extensively trained by the respective manufacturers to provide service on your products. Authorized technicians must complete annual and bi-annual continued education exams in addition to being well versed in manufacturer supplied update bulletins to ensure their level of expertise is as current as the new products which come to market. We urge our customers to provide feedback regarding their experiences which we later use to insure that the level of service we are expected to provide is exactly the level of service you receive.
May I transfer my extended service plan to another person?
Our service plans are 100% transferable. If you would like transfer ownership of the covered product along with its coverage, we require that the request be supplied in writing. For assistance please contact a Representative. Please have all of the new owner's information at hand when requesting a transfer.
Will I have to pay a deductible or any other "hidden costs"?
Generally, the amount of a deductible is almost always proportional to the amount of the premium charged. In order to have a lower deductible, even as low as $0, the plan holder would generally have to agree to a higher premium. For those who want lower premiums, they must agree to a higher deductible. Our extended service plans carry a $0.00 deductible along with low premiums. This means that with an extended service plan there are no high upfront costs and they are committed to cover 100% parts and labor costs on any authorized claim.