The LC-X8 is an XGA video/computer projector that features up to 10000 ANSI Lumens and an LCD panel delivering a remarkable 3000:1 contrast ratio. It is compatible with normal and widescreen input resolutions up to UXGA and 1080p and supports both analog and digital computer and video input in all color standards. The projector uses an inorganic imaging engine which is optimized for extended use while the automated filter cartridge system reduces maintenance.
Eiki LC-X8 Description:
The LC-8 has a wide-range of features and functions such as: Vertical and horizontal lens shift for optimal projector positioning, 10 bit color processing for superior color reproduction, mechanical shutter for true black screen "no show", auto-advancing 10-exposure cartridge air filter which reduces maintenance, a top-accessed filter cartridge and lamphouse which permits easy maintenance, wirelesswired remote control and optional network control. A three year or 6000 hour warranty is included.
Eiki LC-X8 Features:
10000 ANSI Lumens** bright, at 90%+ uniformity, with a 3000:1 contrast ratio.
XGA resolution. UXGA ~ VGA and MAC compatible.
Compatible with Normal and Widescreen input resolutions up to UXGA and 1080p.
Supports both analog and digital computer and video input in all color standards.
Four inputs, including two (unpopulated) module bays. Optional modules available.
A wide range of optional lenses is available. Projects images up to 600" diagonal.
Includes both vertical and horizontal lens shift, for optimal projector positioning.
10 bit color processing for superior color reproduction.
Mechanical shutter for true black screen "no show".
Durable inorganic LCD panels permit extended use.
Auto-advancing 10-exposure cartridge air filter reduces maintenance.
Top-accessed filter cartridge and lamphouse permit easy maintenance.
Wirelesswired remote control. Full RS-232 compatibility. Optional network control.
3 Year / 6000 Hr. Warranty
|Brightness ||up to 10000 ANSI Lumens (**with AH-22051 lens)|
|Color Reproduction ||10 bit / 1.07 Billion Colors|
|Contrast Ratio - Full ON/OFF ||up to 3000:1 (lamp control in Auto mode)|
|Horizontal Resolution - TV Lines ||800|
|Illumination Uniformity (corner to center) ||90%|
|Imaging System ||1.8" PolySilicon active matrix TFT Panels x 3|
|Scanning Frequency ||Auto: H Sync. 15-120kHz; V Sync. 48-120Hz|
|Screen Pixels ||1024 x 768 in stripe configuration|
|Total Pixels ||2,359,296 ((1024 x 768) x 3)|
|Front Elevation ||up to 2.8 up or down|
|Horizontal Keystone Correction - Digital ||Variable +/-20 |
|Horizontal Power Lens Shift ||Max Ratio (L:R) 3:2 ~ 2:3|
|Image Orientation ||Normal, Reversed, Inverted|
|Vertical Keystone Correction - Digital ||Variable +/-40 |
|Vertical Power Lens Shift ||Max Ratio (T:B) 10:0 ~ 0:10|
|Estimated Lamp Life Hours ||up to 3000 Hrs.|
|Lamp ||330W NSHA x 2|
|Image Diagonal - Max. ||600 in. (with AH-22051 lens)|
|Image Diagonal - Min. ||40 in. (with AH-22051 lens)|
|Image Width - Max. ||12.19 m|
|Image Width - Min. ||0.81 m|
|Lens Type ||Not Included - choose from a selection of optional lenses|
|Throw Distance - Max. ||See specifications of selected lens|
|Throw Distance - Min. ||See specifications of selected lens|
|Computer Compatiblity ||UXGA (analog only), SXGA+, SXGA, WXGA, XGA, SVGA, VGA & MAC|
|Computer Formats Supported ||1600x1200 through 640x480|
|Computer Image Sizing ||Normal or Smart compressed or expanded|
|Computer Native Resolution ||1024 x 768 (XGA)|
|Pixel Clock ||230 MHz|
|Remote Control - Projector ||Wireless/Wired x 1|
|Video: Color Systems ||NTSC / PAL / SECAM / NTSC 4.43 / PAL-M&N|
|Video: Compatibility ||480i/p, 575i/p, 720p, 1035i, 1080i-50/60, 1080psf24/25/30 (digital only)|
|Video Formats ||16:9 & 4:3|
|Video: Image Sizing ||Progressive Video Scaling|
|Video: Input Systems ||Composite/Component: Y,Pb/Cb,Pr/Cr, S-Video|
|Number of Modules ||2|
|Modules ||Inputs 1 & 2: fixed configuration, Inputs 3 & 4: (unpopulated) module |
|On Module 1 - DVI-D x 1 ||b. Digital Computer or Video Input w/ HDCP|
|On Module 1 - Dsub15 x 1 ||a. either, Analog Computer (RGB) or, |
|On Module 2 - 5 BNC ||a. either, Computer: (RGBHV) or b. Component Video: (Y,Pb/Cb,Pr/Cr) or Composite Video: (Video) or |
|On Module 2 - 4 pin mini DIN x 1 ||S-Video|
|On Module 3 - Available (unpopulated) ||yes|
|On Module 4 - Available (unpopulated) ||yes|
|Dsub9 x 1 ||RS-232 Port - IN|
|Dsub9 x 1 #2 ||RS-232 Port - OUT|
|MiniStereo x 1 ||Wired Remote Jack|
|USB (series B) x 1 ||Service Port|
|Cabinet Height ||10.5 in. (267.5 mm.)|
|Cabinet Width ||20.8 in. (530 mm.)|
|Cabinet Depth ||29.8 in. (757 mm.)|
|Packaged Height ||21.3 in. (542 mm)|
|Packaged Width ||33.3 in. (846 mm)|
|Packaged Depth ||37.4 in. (951 mm)|
|Packaged Weight ||83.8 lb. (38.0 kg)|
|Projector Orientation ||360 Pitch (including normal, inverted, up, down)|
|Weight ||60.85 lbs. (27.6 kg)|
|Power Management ||Auto Lamp Shut-Off |
|Power Requirements ||100~120/200~240V AC, 50/60Hz|
|Power Consumption ||up to 950 Watt|
|Power Cord ||10 (3.m) Type 3, Detachable|
|Generated Heat ||up to 3,242 BTU / hr (817 Kcal / hr)|
|Operating Noise - dBA ||as low as 45 dBA|
|Operating Temperature - Max. ||104 F (40 C)|
|Operating Temperature - Min. ||41 F (5 C)|
|Electrical Safety Compliance ||IEC, UL, cUL|
|Electromagnetic Compatibility ||FCC Class A, CE Mark|
|maintenance ||Replace Air Filter Cartridge, Replace Lamp|
|Limited Warranty: to the original end-use customer only - Projector ||3 Years|
|Warranty Lamp: ||6 Months Ownership / 500 Hours Use (whichever occurs first)|
|Mercury Warning ||Lamp contains Mercury. Do not put in trash. Dispose of as Hazardous Waste, according to Local, State or Federal Laws.|
This item is brand new and comes with a full manufacturer warranty. Please refer to the table below for details
Don't Gamble on a break-down!
- 100% Parts and Labor
- No Deductibles
- No Lemon Guarantee
- Fully Transferable
- Toll-Free Support
- Worry Free For Up to 5 Years
- Nationwide Coverage
- Rapid Claim System
- Electronic Registration
||Extended Service Plan
||Typical Manufacturer Warranty
|Up to 5 Years including parts and labor
||1 Year Parts, 90 Days Labor
Wear and Tear(Normal Use)
Product Replacement (If Product Cannot be Fixed)
Optional Accidental Damage
Screen or Lens Replacement
24/7 Toll Free Help
No Lemon Policy
Authorized Service Centers in Most Locations
What exactly is an Extended Service Plan?
An extended service plan is generally an extension of your original manufacturer's warranty. Most manufacturers warranty their products to be free from defects for up to one year from the date of purchase. This warranty virtually guarantees you that if your newly purchased product fails, the manufacturer will protect you from the high costs of replacement parts and labor necessary to repair your product. Extended service plans lengthen your product's coverage for up to an additional 60 months (5 years) to insure you get years of performance satisfaction from your newly purchased product.
How is this different than the manufacturer's warranty?
A manufacturer's warranty usually offers limited coverage for a limited time, with parts and labor carrying separate lengths of coverage. For example, a common manufacturer warranty of a product might cover a consumer for one full year on parts defects but only 90 days on the high cost of labor involved to change those parts. Extended service plans provide comprehensive, long term, even length coverage. This means that should your product fail within your plans coverage time frame, both parts and labor costs are covered.
How do I buy an Extended Service Plan?
Extended Service Plans can be purchased along with your product online, or via our toll free number.
Can I renew my Consumer Priority Service extended service plan?
Yes, service plans are renewable and must be submitted 30 days prior to the original plans expiration. Please contact a sales representative to discuss your renewal options.
What should I do if I need extended service?
Our extended service providers offer an easy to use interactive form online which you may use to request that they initiate a claim on your product. Your other alternative is to call the toll-free number on your extended warranty card or email and have a qualified representative make this request for you with the information you will provide. We believe that our claim initiation request process is the absolute best our industry has to offer. It is designed for simplicity and speed.
Who will perform the service on my product?
Our company works with over 11,000 authorized service professionals. Each technician is extensively trained by the respective manufacturers to provide service on your products. Authorized technicians must complete annual and bi-annual continued education exams in addition to being well versed in manufacturer supplied update bulletins to ensure their level of expertise is as current as the new products which come to market. We urge our customers to provide feedback regarding their experiences which we later use to insure that the level of service we are expected to provide is exactly the level of service you receive.
May I transfer my extended service plan to another person?
Our service plans are 100% transferable. If you would like transfer ownership of the covered product along with its coverage, we require that the request be supplied in writing. For assistance please contact a Representative. Please have all of the new owner's information at hand when requesting a transfer.
Will I have to pay a deductible or any other "hidden costs"?
Generally, the amount of a deductible is almost always proportional to the amount of the premium charged. In order to have a lower deductible, even as low as $0, the plan holder would generally have to agree to a higher premium. For those who want lower premiums, they must agree to a higher deductible. Our extended service plans carry a $0.00 deductible along with low premiums. This means that with an extended service plan there are no high upfront costs and they are committed to cover 100% parts and labor costs on any authorized claim.