The Eiki LC-WGC500 HD Digital projector utilizes a 3 panel LCD imaging for rich color saturated computer and video projection, and uses smart data compression / expansion and video scaling. This model provides 5000 ANSI Lumens of brightness, WXGA resolution and 3000:1 contrast ratio for rich imaging power. It has a lamp changer and cartridge air filter for mission critical, hard-to-reach installs, and delivers a wide range of connection inputs and outputs such as acceptance of analog and digital computer, and analog & digital video (HDCP) inputs. Aside from the computer resolution compatibility of up to WUXGA/UXGA and video compatibility of up to 1080p, it also offers a vast range of features such as -50%~+700% digital zoom, power zoom and focus, vertical and horizontal power lens shift, digital keystone correction, conversion of interlaced videos to progressive scan, 3-2 (and 2-2) pulldown support, variable power management, instant lens change system, custom warmup screen and a built-in color auto picture control. Lastly, a wide range of optional wideangle and telephoto lenses are compatible with the LC-WGC500.
Eiki LC-WGC500A Features:
5,000 ANSI Lumens bright, with 90% uniformity and a 3000:1 contrast ratio.
3 panel LCD imaging for rich, color saturated computer and video projection.
Native 1280x800 resolution. Compatible with input up-to 1080p and WUXGA.
Lamp changer & cartridge air filter for mission critical/hard-to-reach installs.
Includes most professional input configurations, including 5BNC and HDMI.
Accepts analog & digital computer and analog & digital video (HDCP) input.
Power zoom and focus. V & H power lens shift & digital keystone correction.
Optional wide-angle and telephoto lenses. Instant lens change system.
Converts interlace to progressive scan.
Variable Power Management option. Optional local or remote keylock.
Wireless remote control mouse and laser pointer. -50 ~ +700% digital zoom.
Custom warm-up screen option. Built-in Color Auto Picture Control.
3 year projector warranty!
|Connections - Outputs|
|Computer monitor ||Dsub15 x 1|
|Connections - Audio Signal Input|
|1. ||For Inputs 1 & 2 - Stereo: MiniStereo x 1|
|2. ||For Input 3 - Stereo: RCA x 2|
|Connections - Audio Signal Output|
|1. ||Variable, Stereo: MiniStereo x 1|
|Connections - Auxilary Ports|
|RS-232 Control Port ||Dsub9 x 1|
|Mouse Port ||USB-B x 1|
|Network Interface Port ||Dsub25 x 1|
|Wired RC Port ||MiniStereo x 1|
|Connections - Image Signal Input|
|1a. ||Analog Computer - Dsub15 x 1|
|1b. ||Digital Computer / Digital Video (w HDCP) - HDMI x 1|
|2a. ||Analog Computer (RGBHV) - BNC x 5|
|2b. ||Analog Video (Y, Pb/Cb, Pr/Cr), 3BNC|
|2c. ||Composite, 1BNC|
|3. ||S-Video - S-Video x 1|
|Brightness ||up-to 5,000 ANSI Lumens (with standard AH-23421 lens)|
|Color Reproduction ||8-bit (16.7 million colors)|
|Contrast Ratio ||up-to 3000:1|
|Illumination Uniformity (corner to center) ||90%|
|Imaging System ||0.95 in (24 mm) Inorganic PolySilicon active matrix TFT Panels x 3|
|Scanning Frequency ||Auto: 15~100 kHz; 50~100 Hz|
|Resolution and Aspect Ratio ||WXGA (1280x800), 16x10|
|Total Pixels ||3,072,000 ((1280x800) x 3)|
|Horizontal Keystone Correction - Digital ||Digital: up-to 20 Left or Right|
|Horizontal Lens Shift (% of image width) ||up-to 15% Left or Right|
|Image Orientation ||Normal, Reversed, Inverted|
|Image Signal Resizing ||Smart Scaling Technology|
|Maximum Pitch ||up-to 360 |
|Projector Elevation Adjustment (legs) ||up-to 3.5 Up|
|Vertical Keystone Correction - Digital ||Digital: up-to 40 Up or Down|
|Vertical Lens Shift (% of image height) ||up-to 50% Up or Down|
|Estimated Lamp Life Hours ||up-to 3,000 Hours (6,000 Hrs. Combined)|
|Lamp ||330 Watts NSHA x 2|
|Focal Length ||1.3~1.69 in (33~43 mm)|
|Image Diagonal ||30~300 in (76.2~762 cm)|
|Image Width ||2.0~20 ft (0.61~6.1 m)|
|Image Width - Max. ||6.1 m|
|Image Width - Min. ||0.61 m|
|Lens Speed ||1.7~2.1|
|Lens Type ||Changeable - Power Zoom and Focus|
|Throw Distance (Wide~Tele) ||4.26~34.44 ft (1.3~10.5 m)|
|Throw:Width ratio ||1.64~2.13:1|
|Zoom Ratio - Max:Min: ||1.3:1|
|Computer Input in Pixels ||1920x1200~640x480|
|Computer In 4x3 analog ||UXGA, SXGA+, SXGA, XGA, SVGA, VGA, MAC|
|Computer In 4x3 digital ||UXGA, SXGA+, SXGA, XGA, SVGA, VGA|
|Computer In Wide analog ||WSXGA+, WSXGA,WXGA|
|Computer In Wide digital ||WUXGA, WSXGA+,WSXGA, WXGA+,WXGA|
|Pixel Clock ||up-to 140 MHz|
|Local Control ||Full Function|
|Remote Projector Control ||Wireless/Wired x 1 w/ Laser Pointer|
|Video Formats ||NTSC / PAL / SECAM / NTSC 4.43 / PAL-M&N|
|Video In analog ||480i/p, 575i/p, 720p, 1035i, 1080i|
|Video In digital ||480p, 575p, 720p, 1035i, 1080i/p (50/60)|
|Cabinet Size ||6.89 x 17.76 x 21.66 in (17.5 x 45.1 x 55.0 cm)(excluding legs)|
|Packaged Size (HxWxD) ||14.8 x 22.5 x 26.4 in (37.4 x 57 x 67 cm)|
|Packaged Weight ||44.8 lb (20.3 kg)|
|Weight ||34 lb (15.4 kg)|
|Amplifier ||Stereo: 3 Watt|
|Speakers (Built-in) ||2.0 x 3.5 in (5.0 x 9.0 cm) x 2 (Stereo)|
|Power Management ||Auto Shutdown|
|Power Requirements ||100-240V AC, 50/60 Hz|
|Power Consumption ||0.43 W in Eco Standby mode, up-to 530 W|
|Power Cord ||10 ft (3 m) Type C13, Detatchable|
|Generated Heat ||up-to 1,809 BTU/hr (1,908 kJ/hr)|
|Operating Noise - dBA ||as low as 31 dBA|
|Operating Temperature ||41~104 F (5~40 C)|
|Electrical Safety Compliance ||IEC / UL / cUL|
|Electromagnetic Compatibility ||FCC Class B, CE Mark|
|Kensington Security Slot ||yes|
|Security Chain Hook ||yes|
|Maintenance ||Replace Cartridge Air Filter, Change Lamp|
|Limited Warranty: to the original end-use customer only - Projector ||3 Years|
|Warranty Lamp: ||1 Year Ownership / 500 Hours Use (whichever occurs first)|
|Laser Warning ||The following warning is required by the US FDA and pertains to the laser pointer in wireless remote control for this projector. Caution! Laser Radiation - Do not stare into beam.|
|Mercury Warning ||Lamp contains Mercury. Do not put in trash. Dispose of as Hazardous Waste, according to Local, State or Federal Laws.|
This item is brand new and comes with a full manufacturer warranty. Please refer to the table below for details
Don't Gamble on a break-down!
- 100% Parts and Labor
- No Deductibles
- No Lemon Guarantee
- Fully Transferable
- Toll-Free Support
- Worry Free For Up to 5 Years
- Nationwide Coverage
- Rapid Claim System
- Electronic Registration
||Extended Service Plan
||Typical Manufacturer Warranty
|Up to 5 Years including parts and labor
||1 Year Parts, 90 Days Labor
Wear and Tear(Normal Use)
Product Replacement (If Product Cannot be Fixed)
Optional Accidental Damage
Screen or Lens Replacement
24/7 Toll Free Help
No Lemon Policy
Authorized Service Centers in Most Locations
What exactly is an Extended Service Plan?
An extended service plan is generally an extension of your original manufacturer's warranty. Most manufacturers warranty their products to be free from defects for up to one year from the date of purchase. This warranty virtually guarantees you that if your newly purchased product fails, the manufacturer will protect you from the high costs of replacement parts and labor necessary to repair your product. Extended service plans lengthen your product's coverage for up to an additional 60 months (5 years) to insure you get years of performance satisfaction from your newly purchased product.
How is this different than the manufacturer's warranty?
A manufacturer's warranty usually offers limited coverage for a limited time, with parts and labor carrying separate lengths of coverage. For example, a common manufacturer warranty of a product might cover a consumer for one full year on parts defects but only 90 days on the high cost of labor involved to change those parts. Extended service plans provide comprehensive, long term, even length coverage. This means that should your product fail within your plans coverage time frame, both parts and labor costs are covered.
How do I buy an Extended Service Plan?
Extended Service Plans can be purchased along with your product online, or via our toll free number.
Can I renew my Consumer Priority Service extended service plan?
Yes, service plans are renewable and must be submitted 30 days prior to the original plans expiration. Please contact a sales representative to discuss your renewal options.
What should I do if I need extended service?
Our extended service providers offer an easy to use interactive form online which you may use to request that they initiate a claim on your product. Your other alternative is to call the toll-free number on your extended warranty card or email and have a qualified representative make this request for you with the information you will provide. We believe that our claim initiation request process is the absolute best our industry has to offer. It is designed for simplicity and speed.
Who will perform the service on my product?
Our company works with over 11,000 authorized service professionals. Each technician is extensively trained by the respective manufacturers to provide service on your products. Authorized technicians must complete annual and bi-annual continued education exams in addition to being well versed in manufacturer supplied update bulletins to ensure their level of expertise is as current as the new products which come to market. We urge our customers to provide feedback regarding their experiences which we later use to insure that the level of service we are expected to provide is exactly the level of service you receive.
May I transfer my extended service plan to another person?
Our service plans are 100% transferable. If you would like transfer ownership of the covered product along with its coverage, we require that the request be supplied in writing. For assistance please contact a Representative. Please have all of the new owner's information at hand when requesting a transfer.
Will I have to pay a deductible or any other "hidden costs"?
Generally, the amount of a deductible is almost always proportional to the amount of the premium charged. In order to have a lower deductible, even as low as $0, the plan holder would generally have to agree to a higher premium. For those who want lower premiums, they must agree to a higher deductible. Our extended service plans carry a $0.00 deductible along with low premiums. This means that with an extended service plan there are no high upfront costs and they are committed to cover 100% parts and labor costs on any authorized claim.