The Eiki 4200 lumen LC-SXG400L Digital 3LCD Projector uses a physically centered lens, supporting pitch through 360 and power Lens shift up to 50% Up/Down and 15% Left/Right, making setting-up easier. The LC-SXG400L also uses push-button lens replacement makes dismantling of the projector unnecessary and the built-in test pattern array offers easy adjustments. Furthermore, the one-way cooling system (1 in & 1 out port) and front accessed high-capacity air filter simplifies installation maintenance while the on-screen warning and the rear accessed lamphouse makes lamp change easy. A clogged air filter is easily detected thanks to both LED and on-screen warning.
Eiki LC-SXG400L Features:
4200 ANSI Lumens bright at 90% uniformity and a 1300:1 contrast ratio.
3 panel LCD imaging for rich, color saturated computer and video projection.
SXGA+ resolution. Smart data compression / expansion, and video scaling.
Includes most professional input configurations, including 5 BNC and DVI.
Accepts analog and digital computer input, analog and digital w/HDCP video.
Compatible with Computer sources up to UXGA, Video sources up to 1080i.
Power zoom and focus. H & V Power lens shift. Digital keystone correction.
Optional WideAngle and Telephoto Lenses. Instant Lens Change System.
Converts interlace to progressive scan. 3-2 (and 2-2) pulldown support.
Variable Power Management Option. Optional Local or Remote Keylock.
Custom Warmup Screen Image Option. Built-in Color Auto Picture
Wireless/wired remote w/mouse and laser pointer. -50%~+700% digital zoom. Control.
3 Year Projector Warranty.
|Brightness - ANSI Lumens ||4,200|
|Contrast Ratio - Full ON/OFF ||1300:1|
|Illumination Uniformity (corner to center) ||90%+|
|Imaging System ||1.0 PolySilicon active matrix TFT Panels x 3|
|Scanning Frequency ||Auto: H Sync. 15-100 kHz; V Sync. 50-100 Hz|
|Screen Pixels ||1400 x 1050 in stripe configuration|
|Size of Color Palette ||16.7 Million|
|Total Pixels ||1,470,000 (1400 x 1050) x 3|
|Horizontal Anti Keystone ||Power Lens Shift, Left or Right 15%|
|Maximum Pitch ||anywhere up to 360 degrees off the horizontal axis|
|Vertical Anti-Keystone ||Power Lens Shift, Up only 50%|
|Vertical Keystone Correction - Digital ||Up to 40 degrees Up or Down|
|Lamp ||330 Watt NSHA|
|Image Diagonal - Max. ||762 cm|
|Image Diagonal - Min. ||76.2 cm|
|Image Width - Max. ||6.1 m|
|Image Width - Min. ||0.61 m|
|Lens Type ||Lens not supplied|
|Throw Distance - Max. ||10 m|
|Throw Distance - Min. ||1.2 m|
|Throw:Width ratio ||1.64 ~ 2.13:1|
|Zoom Ratio - Max:Min: ||1.3:1|
|Computer Compatiblity ||UXGA, SXGA+, SXGA, WXGA, XGA, SVGA, VGA & MAC|
|Computer Formats Supported ||1600x1200 through 640x480|
|Computer Image Sizing ||Normal or Smart compressed or expanded|
|Computer Native Resolution ||1400 x 1050|
|Pixel Clock ||165 MHz|
|Local Control ||Full Function|
|Remote Control - Projector & Mouse ||Wireless (Infra Red)/Wired with Laser Pointer x 1|
|Video: Color Systems ||NTSC / PAL / SECAM / NTSC 4.43 / PAL-M&N|
|Video: Compatibility ||480i/p, 575i/p, 720p, 1035i, 1080i-50/60|
|Video Formats ||4:3 & 16:9|
|Video: Input Systems ||Analog: Composite, S-Video, Component & Digital: DVI w/HDCP|
|On Input 1 - Dsub15 x 1 ||Computer: Analog|
|On Input 1 - ministereo x 1 ||Stereo Audio: MiniStereo x 1|
|On Input 2 - 3 BNC ||Video: Analog (Y,Pb/Cb,Pr/Cr)|
|On Input 2 - 5 BNC ||Computer: Analog (RGBHV)|
|On Input 2 - ministereo x 1 ||Stereo Audio: MiniStereo x 1|
|MiniStereo x 1 ||Wired Remote Control|
|MiniStereo x 1 #2 ||Audio Line Out (Variable)|
|RCA x 1 (yellow) ||Video In (Composite)|
|RCA x 2 (L & R or red & white) ||Audio In - Video (Composite/S-video)|
|4 pin DIN (S-Video) x 1 ||S-Video Input (Y/C)|
|8 pin DIN x 1 ||RS-232 control port|
|Cabinet Height ||6.46" (164 mm)|
|Cabinet Width ||13.7" (348 mm)|
|Cabinet Depth ||17.48" (444 mm)|
|Packaged Height ||14.6" (370 mm)|
|Packaged Width ||19.3" (490 mm)|
|Packaged Depth ||23.3" (590 mm)|
|Packaged Weight ||28.4 lb. (12.9 kg.)|
|Weight ||19.62 lb. (8.9 kg.)|
|Amplifier ||Mono: 1 Watts RMS|
|Speakers (Built-in) ||1.1 x (2.8 cm)|
|Power Management ||Auto Shut-Off|
|Power Requirements ||100-240V AC, 50/60Hz|
|Power Consumption ||500 Watts|
|Power Cord ||10' (3M) Type 3, Detachable|
|Generated Heat ||1706 BTU (430 KC)|
|Operating Temperature - Max. ||95 F (35 C)|
|Operating Temperature - Min. ||41 F (5 C)|
|Estimated Lamp Life Hours (ECO Mode) ||3,000|
|Fan Noise (ECO Mode) - dBA ||35|
|Kensington Security Slot ||Cable Locking System|
|Keylock Function ||Local or Remote|
|Maintenance ||Clean Air Filter, Replace Lamp|
|Limited Warranty: to the original end-use customer only - Projector ||3 Years|
|Warranty Lamp: ||1 Year Ownership / 500 Hours Use (whichever occurs first)|
|Laser Warning ||The following warning is required by the US FDA and pertains to the laser pointer in wireless remote control for this projector. Caution! Laser Radiation - Do not stare into beam.|
|Mercury Warning ||Lamp contains Mercury. Do not put in trash. Dispose of as Hazardous Waste, according to Local, State or Federal Laws.|
This item is brand new and comes with a full manufacturer warranty. Please refer to the table below for details
Don't Gamble on a break-down!
- 100% Parts and Labor
- No Deductibles
- No Lemon Guarantee
- Fully Transferable
- Toll-Free Support
- Worry Free For Up to 5 Years
- Nationwide Coverage
- Rapid Claim System
- Electronic Registration
||Extended Service Plan
||Typical Manufacturer Warranty
|Up to 5 Years including parts and labor
||1 Year Parts, 90 Days Labor
Wear and Tear(Normal Use)
Product Replacement (If Product Cannot be Fixed)
Optional Accidental Damage
Screen or Lens Replacement
24/7 Toll Free Help
No Lemon Policy
Authorized Service Centers in Most Locations
What exactly is an Extended Service Plan?
An extended service plan is generally an extension of your original manufacturer's warranty. Most manufacturers warranty their products to be free from defects for up to one year from the date of purchase. This warranty virtually guarantees you that if your newly purchased product fails, the manufacturer will protect you from the high costs of replacement parts and labor necessary to repair your product. Extended service plans lengthen your product's coverage for up to an additional 60 months (5 years) to insure you get years of performance satisfaction from your newly purchased product.
How is this different than the manufacturer's warranty?
A manufacturer's warranty usually offers limited coverage for a limited time, with parts and labor carrying separate lengths of coverage. For example, a common manufacturer warranty of a product might cover a consumer for one full year on parts defects but only 90 days on the high cost of labor involved to change those parts. Extended service plans provide comprehensive, long term, even length coverage. This means that should your product fail within your plans coverage time frame, both parts and labor costs are covered.
How do I buy an Extended Service Plan?
Extended Service Plans can be purchased along with your product online, or via our toll free number.
Can I renew my Consumer Priority Service extended service plan?
Yes, service plans are renewable and must be submitted 30 days prior to the original plans expiration. Please contact a sales representative to discuss your renewal options.
What should I do if I need extended service?
Our extended service providers offer an easy to use interactive form online which you may use to request that they initiate a claim on your product. Your other alternative is to call the toll-free number on your extended warranty card or email and have a qualified representative make this request for you with the information you will provide. We believe that our claim initiation request process is the absolute best our industry has to offer. It is designed for simplicity and speed.
Who will perform the service on my product?
Our company works with over 11,000 authorized service professionals. Each technician is extensively trained by the respective manufacturers to provide service on your products. Authorized technicians must complete annual and bi-annual continued education exams in addition to being well versed in manufacturer supplied update bulletins to ensure their level of expertise is as current as the new products which come to market. We urge our customers to provide feedback regarding their experiences which we later use to insure that the level of service we are expected to provide is exactly the level of service you receive.
May I transfer my extended service plan to another person?
Our service plans are 100% transferable. If you would like transfer ownership of the covered product along with its coverage, we require that the request be supplied in writing. For assistance please contact a Representative. Please have all of the new owner's information at hand when requesting a transfer.
Will I have to pay a deductible or any other "hidden costs"?
Generally, the amount of a deductible is almost always proportional to the amount of the premium charged. In order to have a lower deductible, even as low as $0, the plan holder would generally have to agree to a higher premium. For those who want lower premiums, they must agree to a higher deductible. Our extended service plans carry a $0.00 deductible along with low premiums. This means that with an extended service plan there are no high upfront costs and they are committed to cover 100% parts and labor costs on any authorized claim.