The Eiki EIP-XSP2500 Manual Zoom and Focus Projector boasts a brightness level of 2500 ANSI Lumens and 1600:1 contrast ratio, with XGA resolution. It utilizes a 1 chip DLP imaging technology, and a 6-segment color wheel and BrilliantColor color processing to deliver a seamless high-contrast image. Aside from its short throw fixed focal length lens with manual focus, it also supports analog video input in all color standards up-to 1080i, accepts composite, component, and S-Video in all major standards, and has two Dsub15 computer inputs, plus one Dsub15 computer monitor output. Furthermore, its low maintenance capability allows filter free operation and long life lamp, not to mention its reduced power consumption and fan noise in economy mode. Other features include a built-in wired LAN connection for projector monitoring and control, a kensington security slot, digital zoom function, and a wireless remote control.
Eiki EIP-XSP2500 Features:
2,500 ANSI lumens bright with 80% uniformity and a 1600:1 contrast ratio.
Native XGA resolution. Compatible with inputs up-to SXGA and WXGA.
Supports analog video input in all color standards up-to 1080i.
1 chip DLP imaging technology delivers a seamless high-contrast image.
6-segment color wheel and BrilliantColor color processing.
Short throw fixed focal length lens with manual focus.
Fixed image offset. Vertical digital keystone correction.
Two Dsub15 computer inputs, plus one Dsub15 computer monitor output.
Accepts composite, component, and S-Video in all major standards.
Built-in wired LAN connection for projector monitoring and control.
Low maintenance: filter free operation and long life lamp.
Eco mode operation reduces power consumption and fan noise.
Kensington security slot.
Wireless remote control. Digital zoom function.
3 Year Projector Warranty!
|Connections - Audio Signal Input|
|1. ||Stereo: MiniStereo x 1|
|Connections - Auxilary Ports|
|RS-232 Control Port ||Dsub9 x 1|
|Network Interface Port ||RJ45 x 1|
|Connections - Image Signal Input|
|1. ||Computer (VGA IN 1) Dsub15 x 1, Component Video (with optional adapter), 3RCA|
|2. ||Computer (VGA IN 2) Dsub15 x 1, Component Video (with optional adapter), 3RCA|
|3. ||S-Video S-Video x 1|
|4. ||Composite Video RCA x 1|
|Connections - Outputs|
|Computer monitor ||Dsub15 x 1|
|Brightness ||up-to 2,500 ANSI Lumens|
|Color Reproduction ||8-bit (16.7 million colors)|
|Contrast Ratio ||up-to 1600:1|
|Illumination Uniformity (corner to center) ||80%|
|Imaging System ||0.55 in (14 mm) 1-chip DLP x 1|
|Scanning Frequency ||Auto: H: 15-82 kHz; V: 50-85 Hz|
|Resolution and Aspect Ratio ||XGA (1024x768), 4:3|
|Total Pixels ||1024x768|
|Color Wheel ||6 segment, (RGBWYC)|
|Image Orientation ||Normal, Reversed, Inverted|
|Image Signal Resizing ||Smart Scaling Technology|
|Maximum Pitch ||up-to 360 Up or Down|
|Projector Elevation Adjustment (legs) ||up-to 9 Up|
|Pixel Clock ||up-to 165 MHz|
|Vertical Keystone Correction - Digital ||up-to 20 Up or Down|
|Vertical Lens Shift (% of image width) ||Adjustable 52.0-54.5% Up|
|Estimated Lamp Life Hours ||up-to 5,000 Hours|
|Lamp ||230 Watts P-VIP|
|Focal Length ||0.668 in (17 mm)|
|Image Diagonal ||30-300 in (76.2-762 cm)|
|Image Width ||2.0-20 ft (0.61-6.1 m)|
|Image Width - Max. ||6.1 m|
|Image Width - Min. ||0.61 m|
|Lens Speed ||f: 2.6|
|Lens Type ||Attached - Fixed FL, Manual Focus|
|Throw Distance (Wide~Tele) ||1.2-12.4 ft (0.38-3.78 m)|
|Throw:Width ratio ||0.62:1|
|Computer Input in Pixels ||up-to 1280x1024 (4:3), 1280x800 (16:10)|
|Computer In 4x3 analog ||SXGA, XGA, SVGA, VGA, MAC|
|Computer In Wide analog ||WXGA|
|Local Control ||Full Function|
|Remote Control - Projector ||Wireless (Infra Red) x 1|
|Video Formats ||NTSC / PAL / SECAM / NTSC 4.43 / PAL-M&N|
|Video In analog ||480i/p, 575i/p, 720p, 1080i|
|Cabinet Size ||3.4 x 8.1 x 11.0 in (8.5 x 20.6 x 28.0 cm)(excluding protrusions)|
|Packaged Size (HxWxD) ||7.6 x 13.6 x 14.2 in (19.4 x 34.5 x 36 cm)|
|Packaged Weight ||10.1 lb (4.6 kg)|
|Weight ||6.6 lb (3.0 kg)|
|Amplifier ||Mono: 2 Watt|
|Speakers (Built-in) ||1.3 in (3.2 cm) x 1 (Mono)|
|Power Management ||Auto Shutdown|
|Power Requirements ||100-240V AC, 50/60 Hz|
|Power Consumption ||0.9 W in Eco Standby mode, up-to 300 W|
|Power Cord ||6 ft (1.8 m) Type C13, Detachable|
|Generated Heat ||3.4 BTU/hr in Eco Standby mode, up-to 1,024 BTU/hr|
|Operating Noise - dBA ||as low as 34 dBA|
|Operating Temperature ||41-95 F (5-35 C)|
|Electrical Safety Compliance ||IEC / UL / cUL|
|Electromagnetic Compatibility ||FCC Class A, CE Mark|
|Kensington Security Slot ||Yes|
|maintenance ||Change Lamp|
|Limited Warranty: to the original end-use customer only - Projector ||3 Years|
|Warranty Lamp: ||6 Months Ownership / 500 Hours Use (whichever occurs first)|
|Mercury Warning ||Lamp contains Mercury. Do not put in trash. Dispose of as Hazardous Waste, according to Local, State or Federal Laws.|
This item is brand new and comes with a full manufacturer warranty. Please refer to the table below for details
Don't Gamble on a break-down!
- 100% Parts and Labor
- No Deductibles
- No Lemon Guarantee
- Fully Transferable
- Toll-Free Support
- Worry Free For Up to 5 Years
- Nationwide Coverage
- Rapid Claim System
- Electronic Registration
||Extended Service Plan
||Typical Manufacturer Warranty
|Up to 5 Years including parts and labor
||1 Year Parts, 90 Days Labor
Wear and Tear(Normal Use)
Product Replacement (If Product Cannot be Fixed)
Optional Accidental Damage
Screen or Lens Replacement
24/7 Toll Free Help
No Lemon Policy
Authorized Service Centers in Most Locations
What exactly is an Extended Service Plan?
An extended service plan is generally an extension of your original manufacturer's warranty. Most manufacturers warranty their products to be free from defects for up to one year from the date of purchase. This warranty virtually guarantees you that if your newly purchased product fails, the manufacturer will protect you from the high costs of replacement parts and labor necessary to repair your product. Extended service plans lengthen your product's coverage for up to an additional 60 months (5 years) to insure you get years of performance satisfaction from your newly purchased product.
How is this different than the manufacturer's warranty?
A manufacturer's warranty usually offers limited coverage for a limited time, with parts and labor carrying separate lengths of coverage. For example, a common manufacturer warranty of a product might cover a consumer for one full year on parts defects but only 90 days on the high cost of labor involved to change those parts. Extended service plans provide comprehensive, long term, even length coverage. This means that should your product fail within your plans coverage time frame, both parts and labor costs are covered.
How do I buy an Extended Service Plan?
Extended Service Plans can be purchased along with your product online, or via our toll free number.
Can I renew my Consumer Priority Service extended service plan?
Yes, service plans are renewable and must be submitted 30 days prior to the original plans expiration. Please contact a sales representative to discuss your renewal options.
What should I do if I need extended service?
Our extended service providers offer an easy to use interactive form online which you may use to request that they initiate a claim on your product. Your other alternative is to call the toll-free number on your extended warranty card or email and have a qualified representative make this request for you with the information you will provide. We believe that our claim initiation request process is the absolute best our industry has to offer. It is designed for simplicity and speed.
Who will perform the service on my product?
Our company works with over 11,000 authorized service professionals. Each technician is extensively trained by the respective manufacturers to provide service on your products. Authorized technicians must complete annual and bi-annual continued education exams in addition to being well versed in manufacturer supplied update bulletins to ensure their level of expertise is as current as the new products which come to market. We urge our customers to provide feedback regarding their experiences which we later use to insure that the level of service we are expected to provide is exactly the level of service you receive.
May I transfer my extended service plan to another person?
Our service plans are 100% transferable. If you would like transfer ownership of the covered product along with its coverage, we require that the request be supplied in writing. For assistance please contact a Representative. Please have all of the new owner's information at hand when requesting a transfer.
Will I have to pay a deductible or any other "hidden costs"?
Generally, the amount of a deductible is almost always proportional to the amount of the premium charged. In order to have a lower deductible, even as low as $0, the plan holder would generally have to agree to a higher premium. For those who want lower premiums, they must agree to a higher deductible. Our extended service plans carry a $0.00 deductible along with low premiums. This means that with an extended service plan there are no high upfront costs and they are committed to cover 100% parts and labor costs on any authorized claim.