Get the film-like imaging of DLP technology in a projector with conference room brightness and built-in network control.
Eiki EIP-5000 Features:
5200 ANSI Lumens bright, at 90% uniformity, and 1200:1 contrast ratio.
XGA resolution. UXGA, SXGA+, SXGA, SVGA, VGA & MAC compatible.
DLP imaging technology delivers a "seamless" high contrast image.
Power Zoom and Focus Lens. Optional Wideangle and Telephoto lenses.
Horizontal & Vertical Lens Shift. H. V & Geometric Keystone Correction.
Dual Lamp System provides redundancy and permits 4 brightness levels.
Wireless/wired remote. Computer mouse control. 8-power digital zoom.
RS-232 and LAN Control Compatible: Built in DB9, and RJ45 & web server.
Smart data compression / expansion, and video scaling. sRGB Compatibility.
Displays both Regular 4:3 and Widescreen 16:9 ratio video formats.
Converts Interlace video to Progressive scan. 2-3 Pulldown Support.
Accepts Analog, and (DVI w/HDCP) video input signals.
Power Management, Keylock Security, and Custom Warmup Screen options.
Unique Projector Stack Control and VideoWall Signal Division features.
3 Year Projector Warranty!
|Brightness - ANSI Lumens ||5200|
|Contrast Ratio - Full ON/OFF ||1200:1|
|Horizontal Resolution - TV Lines ||750|
|Illumination Uniformity (corner to center) ||90%|
|Imaging System ||0.7" DDR DLP Single DMD |
|Scanning Frequency ||Auto: H Sync. 15~126 KHz; V Sync. 43~200 Hz|
|Screen Pixels ||1024 x 768 in stripe configuration|
|Size of Color Palette ||16.7 Million|
|Color Wheel ||4 segment, 3X speed |
|Front Elevation ||up to 9 up|
|Geometric Keystone Correction ||Digital|
|Horizontal Anti Keystone ||Power Lens Shift (L:R~R:L) 6.5:3.5 ~ 3.5:6.5|
|Horizontal Keystone Correction - Digital ||up to 30 left or right|
|Vertical Anti-Keystone ||Power Lens Shift (Top:Bottom) 10:0 ~ 1:1|
|Vertical Keystone Correction - Digital ||up to 30 up or down|
|Estimated Lamp Life Hours ||up to 2500 Hours of Use|
|Lamp ||260 Watt UHP x 2|
|Focal Length - Max. ||1.23in.|
|Focal Length - Min. ||1.01in.|
|Image Diagonal - Max. ||500 in.|
|Image Diagonal - Min. ||40 in.|
|Image Width - Max. ||33.3 ft.|
|Image Width - Min. ||2.5 ft.|
|Lens Protection ||Lens Cap|
|Lens Speed ||1.8~2.0|
|Lens Type ||Power Zoom & Focus|
|Throw Distance - Max. ||44 ft.|
|Throw Distance - Min. ||4.8 ft.|
|Throw:Width ratio ||1.8~2.2:1|
|Zoom Ratio - Max:Min: ||1.22:1|
|Computer Compatiblity ||UXGA, SXGA+, SXGA, WXGA, XGA, SVGA, VGA & MAC: 13~21; Workstation: SUN, SGI|
|Computer Formats Supported ||1600x1200, 1280x1024, 1024x768, 800x600, 640x480|
|Computer Image Sizing ||Normal or Smart compressed or expanded|
|Computer Native Resolution ||1024 x 768|
|Pixel Clock ||12~230 MHz|
|Computer Mouse Control ||via External IR Receiver on USB-A cable|
|Local Control ||Full Function|
|Remote Control - Projector & Mouse ||Wireless / wired x 1|
|EDTV Compatibility ||480p, 576p|
|HDTV Compatibility ||720p (50/60), 1035i (50/60), 1080i (50/60)|
|SDTV Compatibility ||480i / 540p, 576i|
|Video: Color Systems ||NTSC / PAL / SECAM / NTSC 4.43 / PAL-M&N|
|Video Formats ||4:3 & 16:9|
|Video: Image Sizing ||Video Scaling Technology|
|On Input 1 - Dsub15 x 1 ||Analog RGB|
|On Input 1 - Dsub15 x 1 #2 ||Data/Video Monitor (shared: input 1 & 2)|
|On Input 1 - ministereo x 1 ||Audio: Stereo: (L & R)|
|On Input 2 - 3 BNC ||or ( Composite/Component: Y, Pb/Cb, Pr/Cr )|
|On Input 2 - 5 BNC ||either Computer: (RGBHV) or Video: (RGBHV)|
|On Input 2 - ministereo x 1 ||Audio: Stereo: (L&R) (shared with input 3) |
|On Input 3 - DVI-D ||either Computer - Digital RGB or Video - Digital HDCP: (same)|
|On Input 3 - MiniStereo x 1 ||Audio: Stereo: (L&R) (shared with input 2)|
|On Input 4 - RCA x 1 ||Video: Composite|
|On Input 4 - MiniStereo x 1 ||Audio: Stereo: (L&R) (shared with input 5)|
|On Input 5 - S-Video x 1 ||Video: S-Video|
|On Input 5 - MiniStereo x 1 ||Audio: Stereo: (L&R) (shared with input 4)|
|Dsub9 x 1 ||RS-232 Control Port|
|MiniStereo x 1 ||Wired Remote Port|
|MiniStereo x 1 #2 ||Stereo: (L&R) (follows video)|
|RJ45f ||LAN Interface - 100Base-TX 10/100 Mbps, auto-detecting.|
|RCA x 1 (yellow) ||Video In (Composite)|
|4 pin DIN (S-Video) x 1 ||S-Video Input (Y/C)|
|Cabinet Height ||7.1 in.|
|Cabinet Width ||16.1 in.|
|Cabinet Depth ||18.5 in. (471 mm)|
|Height (including Protrusions) ||7.6 in.|
|Width (including Protrusions) ||18.5 in.|
|Depth (including Protrusions) ||16.2 in.|
|Packaged Height ||15.4 in.|
|Packaged Width ||22 in.|
|Packaged Depth ||24.4 in.|
|Packaged Weight ||46.3 lb.|
|Weight ||33.2 lbs.|
|Amplifier ||Stereo: 3 Watts|
|Speakers (Built-in) ||Stereo: 1.3 in. (3.3 cm) dia. (round) x 2|
|Power Management ||Auto Shut-Off|
|Power Requirements ||100-240V AC, 50/60Hz|
|Power Consumption ||up to 650 W|
|Power Cord ||11.8' Type 3, Detachable|
|Generated Heat ||up to 2,218 BTU/hr. (559 Kcal/hr)|
|Operating Noise - dBA ||as low as 35 dBA|
|Operating Temperature - Max. ||104 F (40 C)|
|Operating Temperature - Min. ||41 F (5 C)|
|Electrical Safety Compliance ||UL, cUL, CE|
|Kensington Security Slot ||Cable Locking System|
|maintenance ||Replace Lamp|
|Limited Warranty: to the original end-use customer only - Projector ||3 Years|
|Warranty Lamp: ||6 Months Ownership / 500 Hours Use (whichever occurs first)|
|Mercury Warning ||Lamp contains Mercury. Do not put in trash. Dispose of as Hazardous Waste, according to Local, State or Federal Laws.|
This item is brand new and comes with a full manufacturer warranty. Please refer to the table below for details
Don't Gamble on a break-down!
- 100% Parts and Labor
- No Deductibles
- No Lemon Guarantee
- Fully Transferable
- Toll-Free Support
- Worry Free For Up to 5 Years
- Nationwide Coverage
- Rapid Claim System
- Electronic Registration
||Extended Service Plan
||Typical Manufacturer Warranty
|Up to 5 Years including parts and labor
||1 Year Parts, 90 Days Labor
Wear and Tear(Normal Use)
Product Replacement (If Product Cannot be Fixed)
Optional Accidental Damage
Screen or Lens Replacement
24/7 Toll Free Help
No Lemon Policy
Authorized Service Centers in Most Locations
What exactly is an Extended Service Plan?
An extended service plan is generally an extension of your original manufacturer's warranty. Most manufacturers warranty their products to be free from defects for up to one year from the date of purchase. This warranty virtually guarantees you that if your newly purchased product fails, the manufacturer will protect you from the high costs of replacement parts and labor necessary to repair your product. Extended service plans lengthen your product's coverage for up to an additional 60 months (5 years) to insure you get years of performance satisfaction from your newly purchased product.
How is this different than the manufacturer's warranty?
A manufacturer's warranty usually offers limited coverage for a limited time, with parts and labor carrying separate lengths of coverage. For example, a common manufacturer warranty of a product might cover a consumer for one full year on parts defects but only 90 days on the high cost of labor involved to change those parts. Extended service plans provide comprehensive, long term, even length coverage. This means that should your product fail within your plans coverage time frame, both parts and labor costs are covered.
How do I buy an Extended Service Plan?
Extended Service Plans can be purchased along with your product online, or via our toll free number.
Can I renew my Consumer Priority Service extended service plan?
Yes, service plans are renewable and must be submitted 30 days prior to the original plans expiration. Please contact a sales representative to discuss your renewal options.
What should I do if I need extended service?
Our extended service providers offer an easy to use interactive form online which you may use to request that they initiate a claim on your product. Your other alternative is to call the toll-free number on your extended warranty card or email and have a qualified representative make this request for you with the information you will provide. We believe that our claim initiation request process is the absolute best our industry has to offer. It is designed for simplicity and speed.
Who will perform the service on my product?
Our company works with over 11,000 authorized service professionals. Each technician is extensively trained by the respective manufacturers to provide service on your products. Authorized technicians must complete annual and bi-annual continued education exams in addition to being well versed in manufacturer supplied update bulletins to ensure their level of expertise is as current as the new products which come to market. We urge our customers to provide feedback regarding their experiences which we later use to insure that the level of service we are expected to provide is exactly the level of service you receive.
May I transfer my extended service plan to another person?
Our service plans are 100% transferable. If you would like transfer ownership of the covered product along with its coverage, we require that the request be supplied in writing. For assistance please contact a Representative. Please have all of the new owner's information at hand when requesting a transfer.
Will I have to pay a deductible or any other "hidden costs"?
Generally, the amount of a deductible is almost always proportional to the amount of the premium charged. In order to have a lower deductible, even as low as $0, the plan holder would generally have to agree to a higher premium. For those who want lower premiums, they must agree to a higher deductible. Our extended service plans carry a $0.00 deductible along with low premiums. This means that with an extended service plan there are no high upfront costs and they are committed to cover 100% parts and labor costs on any authorized claim.