Draper 57.5x92" Ultimate Access/Series E Motorized Projection Screen - What if you know that you want a ceiling-recessed screen, but you don't know what projector (or projectors) will be used---and therefore, you don't know the optimum size or aspect ratio of the screen, the optimum screen surface, or whether tab tensioning is required With the Ultimate Access, that's not a problem; order the case now---just make sure it's large enough to accept the largest screen you think you may need. Order the screen later, after the projector decision is made. Or let the occupant make the decision at a later date.
Draper 118346 Description:
What if technology changes What if a new projection format is introduced, or Draper introduces a superior new screen surface With the Ultimate Access, that's not a problem; it's quick, easy and comparatively inexpensive to replace the screen in an Ultimate Access, with no extra electrical or ceiling work.
What if you're planning a facility and the room design is flexible, or the presentation rooms have not yet been determined With the Ultimate Access, that's not a problem; install an Ultimate Access case in each room during construction, and think about screen selection later. Adds great value to the facility.
Draper 118346 Features:
Motor-in-roller assures quiet and smooth operation.
Ceiling-recessed screen with automatic closure.
An independently motorized ceiling closure - in its closed position, the motorized closure forms a solid bottom panel, giving the ceiling a clean appearance.
At the touch of a switch or wireless transmitter, the door of the Ultimate Access opens into the case before the viewing surface descends into the room.
Your audience will be impressed by its precision timing and quiet, fluid movement.
With control options, it can be operated from any remote location.
Depending on surface, available in sizes through 12 x 12' and 15' NTSC.
|Style||Ultimate Access/Series E |
|Front/Rear Projection||Front |
|Mount||Ceiling recessed |
|Finish||M1300; flame and mildew resistant |
|Tension Control||Non-tensioned |
|Keystone Control||Not Applicable |
|Overall Size||Not Specified by Manufacturer |
|Image Size||57.5x92" (1.5 x 2.3 m) |
|Diagonal||109" (2.8 m) |
|Aspect Ratio||16:10 |
|Masking Options||Borders are optional for Series E in A/V format |
|Voltage||110-120VAC, 60Hz, 5-wire motor mounted inside screen roller, 1.1 amp |
|Integrated Control||3-position control switch|
Switch(es) furnished with cover plate
Lifetime lubricated, with internal thermal overload protector and electric brake
Left hand motor location only
Preset, accessible limit switches
|Control Options||Single Station Control (SS-1R)|
Multiple Station Controls (MS-3R / MS-4R)
Low Voltage Switch (LVC-S)
Key Operated 3-Position Switch (KS3 / SP-KSM)
Key Operated Power Supply Switch (KS-1)
Locking Switch Cover Plate (SP-KPS-I)
VIC Override Switch (VIC-OS)
Radio Frequency Remote Control (WRT/R)
Infrared Remote Control (IRT/R)
Low Voltage Control Module (LVC-III)
MC1 Motor Control Board
|Material||Extruded aluminum |
|Length||112-3/8" (285.7cm) |
|Shipping Weight||158 lbs|