XTUNEPRO Scaler, DVI-1.0, Dual Tuner, PiP, Extended Memory & Spatial Surround Sound
| RF Tuner |
| Standard | NTSC * |
| Input Connector | 2 x F type female (75-ohms) |
| TV Frequency Range | 55.25 to 801.25 MHz, 31.25 or 62.5kHz fine tune(181 channels) |
| Demodulation | Quasi-Split Sound concept |
| Video Input |
| Signal Format | Composite, S-Video, YPbPr, RGBHV, DVI 1.0 |
| Supported Resolutions | 1080i, 720p, 480i, 480p, VGA, SVGA, XGA, WVGA, WXGA |
| Connectors | 2 x 4-pin mini DIN female (S-Video1, S-Video-2)
or 2 x RCA phono female to 4-pin mini DIN male adapter (Composite 1, Composite 2)
5 x BNC type male using DVI-I breakout cable (RGBHV / YPbPr)
1 x DVI-D using DVI-I breakout cable (DVI) |
| Video Output |
| Signal Format | YPbPr |
| Supported Resolutions | 1080i, 720p |
| Supported PiP Modes | [Data vs Video, Video vs Video]
Single PiP, Translucent PiP, PAP, Side-by-side, Side-by-side with Vertical Stretch,
0+16 Tile PiP, 1+12 Tile PiP, 1+7 Tile PiP, 1+4 Tile PiP, 1+3 Tile PiP |
| Connectors | PCI type male |
| Audio Input |
| Connectors | 2 x Stereo RCA Phono using audio breakout cable(S-Video1-2 / Composite1-2)
1 x Stereo RCA phono using breakout cable (RGBHV / YPbPr)
1 x Stereo RCA phono using breakout cable (DVI) |
| Inputs | Unbalanced stereo line level |
| Audio Output |
| Connectors | 1 x Stereo RCA phono female using audio breakout cable
(Audio signals are also sent to plasma display for amplification.)
1 x 1/8 inch (3.5 mm) Stereo female (Plasma display audio out) |
| Output | Unbalanced stereo line level |
| Output Level | +12dB to -114dB in 64 steps |
| Control |
| Connector | 6-pin mini DIN female (Control) |
| RS-232 Baud Rate | 9600 bps |
| Physical |
| Dimensions (WxDxH) | 98.4 x 5.7 x 1.0 inches |
| Weight | 2.5 lbs. (Xtune Pro only)
5.7 lbs. (Shipping weight) |
